Datasheet4U Logo Datasheet4U.com

LV8772 - PWM Constant-Current Control Stepping Motor Driver

Description

This IC is switched between standby and operating mode by setting the ST pin.

power-save mode and all logic is reset.

Features

  • Low on resistance (upper side : 0.3Ω ; lower side : 0.25Ω ; total of upper and lower : 0.55Ω ; Ta = 25°C, IO = 2.5A).
  • Excitation mode can be set to 2-phase, 1-2 phase, W1-2 phase , or 4W1-2 phase.
  • BiCDMOS process IC.
  • Excitation step proceeds only by step signal input.
  • Motor current selectable in four steps.
  • Output short-circuit protection circuit incorporated.
  • Unusual condition warning output pins.
  • No control power s.

📥 Download Datasheet

Datasheet preview – LV8772

Datasheet Details

Part number LV8772
Manufacturer ON Semiconductor
File Size 207.92 KB
Description PWM Constant-Current Control Stepping Motor Driver
Datasheet download datasheet LV8772 Datasheet
Additional preview pages of the LV8772 datasheet.
Other Datasheets by ON Semiconductor

Full PDF Text Transcription

Click to expand full text
Ordering number : ENA1975 LV8772 Bi-CMOS LSI PWM Constant-Current Control Stepping Motor Driver http://onsemi.com Overview The LV8772 is a stepping motor driver, which is capable of micro-step drive and supports 4W 1-2 phase excitation. It is stepping motors used in office equipment and amusement applications. Features • Low on resistance (upper side : 0.3Ω ; lower side : 0.25Ω ; total of upper and lower : 0.55Ω ; Ta = 25°C, IO = 2.
Published: |