Datasheet4U Logo Datasheet4U.com

LC898214XC - AF Controller

Description

I O B INPUT OUTPUT BIDIRECTION B B O O O P P O I2C Clock pin I2C Data pin Hall amp output Actuator output pin Actuator output pin Power supply GND Test pin P TYPE Power supply, GND NC NOT CONNECT I2C interface I2CCK I2CDT Hall interface HALL Driver interface OUT1 OUT2 Power

Features

  •  Built-in equalizer circuit using digital operation - AF control equalize circuit - Any coefficient can be specified by I2C I/F  I2C Interface  Built-in A/D converter - Maximum 10-bit - Input 2 channel  Built-in D/A converter - 8-bit - Output 2-channel (Hall offset, Constant current Bias)  Built-in Hall Sensor - Si Hall sensor  Built-in EEPROM - 128 byte (8 byte/page)  Built-in VGA - Hall Amp  Built-in OSC - 48MHz  Built-in Constant Current Driver  Package - WL-CSP 8-pin - Lead-free, h.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LC898212XA AF Control LSI Sanyo
LC898093 Write CD-R/RW Encoder/Decoder IC Sanyo Semicon Device
LC898094 LC898094 Sanyo
LC898128DP OIS & Open-AF Control LSI onsemi
LC8900KQ Digital Audio Interface Receiver Sanyo

Other Datasheets by onsemi

Part Number Description
LC898214XC-MH AF Controller
LC898214XD AF Controller
LC898212XA AF Control LSI
LC898212XC AF Controller
LC898212XD AF Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Ordering number : ENA2328A LC898214XC CMOS LSI AF Controller Overview This LSI is AF control LSI. It consists of 1 system of feedback circuit for AF control. http://onsemi.com Features  Built-in equalizer circuit using digital operation - AF control equalize circuit - Any coefficient can be specified by I2C I/F  I2C Interface  Built-in A/D converter - Maximum 10-bit - Input 2 channel  Built-in D/A converter - 8-bit - Output 2-channel (Hall offset, Constant current Bias)  Built-in Hall Sensor - Si Hall sensor  Built-in EEPROM - 128 byte (8 byte/page)  Built-in VGA - Hall Amp  Built-in OSC - 48MHz  Built-in Constant Current Driver  Package - WL-CSP 8-pin - Lead-free, halogen-free  Supply voltage - VDD (2.6V to 3.6V) WLCSP8, 1.15x2.37, 0.
Published: |