Datasheet4U Logo Datasheet4U.com

LC898121XA - OIS Controller/Driver

Description

(Type I: INPUT, O: OUTPUT, B: BIDIRECTION, P: Power) Ball No Pin Name Type Description A1 OUT1 O Driver Output A2 VM P Driver VDD (2.6 V to 5.5 V) A3 DVDD30 P Logic 3 V VDD (2.6 V to 3.6 V) A4 DVDD18 P LDO Power supply out (Logic Core VDD (typ 1.8 V)) A5 I2CDT B I2C_IF da

Features

  • Digital Signal Processing.
  • Built.
  • in Digital Servo Circuit.
  • Built.
  • in Gyro Filter.
  • AD Converter.
  • 12 Bit.
  • Input 3ch.
  • Equipped with a Sample.
  • hold Circuit.
  • DA Converter.
  • 8 Bit.
  • Output 2ch.
  • Built.
  • in Serial I/F Circuit (4.
  • wire SPI or 2.
  • wire I2C.
  • Bus Interface).
  • Built.
  • in Hall Bias Circuit.
  • Built.
  • in Hall Amp.
  • Built.

📥 Download Datasheet

Datasheet preview – LC898121XA

Datasheet Details

Part number LC898121XA
Manufacturer ON Semiconductor
File Size 113.73 KB
Description OIS Controller/Driver
Datasheet download datasheet LC898121XA Datasheet
Additional preview pages of the LC898121XA datasheet.

📁 Similar Datasheet

  • LC898128DP - OIS & Open-AF Control LSI (onsemi)
  • LC898093 - Write CD-R/RW Encoder/Decoder IC (Sanyo Semicon Device)
  • LC898094 - LC898094 (Sanyo)
  • LC898212XA - AF Control LSI (Sanyo)
  • LC8900KQ - Digital Audio Interface Receiver (Sanyo)
  • LC8901 - Digital Audio Interface Receiver (Sanyo)
  • LC8901Q - Digital Audio Interface Receiver (Sanyo)
  • LC8902 - Digital Audio Interface Receiver (Sanyo)
  • LC8902Q - Digital Audio Interface Receiver (Sanyo)
  • LC8903 - Digital Audio Interface Receiver (Sanyo)
Other Datasheets by ON Semiconductor

Full PDF Text Transcription

Click to expand full text
DATA SHEET www.onsemi.com Optical Image Stabilization (OIS) Controller & Driver CMOS LSI LC898121XA Overview The LC898121XA is a system LSI integrating a digital signal processing function for Optical Image Stabilization (OIS) and a saturation−driven H bridge driver function. Features Digital Signal Processing • Built−in Digital Servo Circuit • Built−in Gyro Filter • AD Converter ♦ 12 Bit ♦ Input 3ch ♦ Equipped with a Sample−hold Circuit • DA Converter ♦ 8 Bit ♦ Output 2ch • Built−in Serial I/F Circuit (4−wire SPI or 2−wire I2C−Bus Interface) • Built−in Hall Bias Circuit • Built−in Hall Amp • Built−in OSC (Oscillator) ♦ Typ. 48 MHz • Built−in LDO (Low Drop−Out Regulator) ♦ Generation Logic Power (Typ 1.
Published: |