Datasheet4U Logo Datasheet4U.com

LC717A00AJ - Capacitance-Digital-Converter LSI

Features

  • Detection System: Differential Capacitance Detection (Mutual Capacitance Type).
  • Input Capacitance Resolution: Can Detect Capacitance Changes in the Femto Farad Order.
  • Measurement Interval (8 Differential Inputs):.
  • 18 ms (Typ) (at Initial Configuration).
  • 3 ms (Typ) (at Minimum Interval Configuration).
  • External Components for Measurement: Not Required.
  • Current Consumption:.
  • 320 mA (Typ) (VDD = 2.8 V).
  • 740 mA (Typ) (V.

📥 Download Datasheet

Datasheet Details

Part number LC717A00AJ
Manufacturer onsemi
File Size 140.43 KB
Description Capacitance-Digital-Converter LSI
Datasheet download datasheet LC717A00AJ Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LC717A00AJ Capacitance-Digital-Converter LSI Sanyo Semicon Device
LC717A00AR Capacitance-Digital-Converter LSI Sanyo Semicon Device
LC717A10AJ Capacitance-Digital-Converter LSI Sanyo Semicon Device
LC717A10AR Capacitance-Digital-Converter LSI Sanyo Semicon Device
LC7120 CMOS LSI 27MHz CB TRANSCEIVER PLL FREQUENCY SYNTHESIZER Sanyo Semicon Device

Other Datasheets by onsemi

Part Number Description
LC717A00AR Capacitance-Digital-Converter LSI
LC717A00ARGEVK Capacitance-Digital-Converter IC
LC717A10AJ Capacitance-Digital-Converter LSI
LC717A10AR Capacitance-Digital-Converter LSI
LC717A10PJ Capacitance-Digital-Converter LSI

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LC717A00AJ Capacitance‐Digital‐Converter LSI for Electrostatic Capacitive Touch Sensors Overview The LC717A00AJ is a high-performance, low-cost capacitance- digital-converter LSI for electrostatic capacitive touch sensor, especially focused on usability. It has 8 channels capacitance-sensor input. The built-in logic circuit can detect the state (ON/OFF) of each input and output the result. This makes it ideal for various switch applications. The calibration function is automatically performed by the built-in logic circuit during power activation or whenever there are environmental changes. In addition, since initial settings of parameters, such as gain, are configured, LC717A00AJ can operate as stand−alone when the recommended switch pattern is applied.
Published: |