LB1930MC Datasheet | onsemi

Overview The LB1930MC is single-channel forward/reverse DC brush motor driver. This device is optimal for CD, DVD and Blue Ray Disk player loading motors. And it is possible to use it for others as a general-purpose product. Features - The low saturation voltage reduces IC internal heating and allows a high voltage to be applied to the motor. Thus this device can be used even in environments with a high operating ambient temperature. Output saturation voltage: Vsat1 = 0.25V typical (IO = 0.2A) (High side + low side): Vsat2 = 0.55V typical (IO = 0.5A) Operating temperature range: Ta = -30 to +85°C - The LB1930MC features the wide operating voltage range of 2.2 to 10.8V and the low standby current drain of 0.1μA, and therefore can easily be used in battery operated systems. - To minimize through currents, the LB1930MC internal logic passes through an internal standby state when switched by the input signals between forward/reverse and brake, or between forward and reverse. - There are no constraints on the relationship between the input voltage and the supply voltage. For example, the LB1930MC can be used with VCC = 3V, and VIN = 5V. - If the IC chip exceeds 180°C due to an output short causing a large current flow, the built-in thermal protection circuit suppresses the drive current to prevent fires or destruction of the IC. Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Sy Supply voltage Output current Output voltage handling Applied input voltage Allowable power dissipation Operating temperature Storage temperature mbol VCC max IOUT max VOUT max IH max Pd max Topr Tstg Mounted on a specified board - Conditions Ratings 11 1000 VCC + VSF 10.5 750 -30 to +85 -55 to +150 Unit V m A V V m W °C °C - Specified board: 114.3mm × 76.1mm × 1.6mm, glass epoxy board. Caution 1) Absolute maximum ratings represent the value which cannot be exceeded for any length of time. Caution 2) Even when the device is used within the range of absolute maximum ratings, as a...