KAI-04050 Datasheet | onsemi

2336 (H) x 1752 (V) Interline CCD Image Sensor Description The KAI- 04050 Image Sensor is a 4-megapixel CCD in a 1” optical format. Based on the TRUESENSE 5.5 micron Interline Transfer CCD Platform, the sensor Features broad dynamic range, excellent imaging performance, and a flexible readout architecture that enables use of 1, 2, or 4 outputs. The sensor supports full resolution readout up to 32 frames per second, while a Region of Interest (ROI) mode enables partial readout of the sensor at even higher frame rates. A vertical overflow drain structure suppresses image blooming and enables electronic shuttering for precise exposure control. Table 1. GENERAL SPECIFICATIONS Parameter Typical Value Architecture Total Number of Pixels Number of Effective Pixels Number of Active Pixels Pixel Size Active Image Size Aspect Ratio Interline CCD, Progressive Scan 2404 (H) × 1800 (V) 2360 (H) × 1776 (V) 2336 (H) × 1752 (V) 5.5 mm (H) × 5.5 mm (V) 12.85 mm (H) × 9.64 mm (V), 16.06 mm (Diagonal), 1″ Optical Format 4:3 Number of Outputs Charge Capacity Output Sensitivity Quantum Efficiency Pan (- ABA, - QBA, - PBA) R, G, B (- FBA, - QBA) R, G, B (- CBA, - PBA) Read Noise (f = 40 MHz) Dark Current Photodiode VCCD 1, 2, or 4 20,000 electrons 34 m V/e- 44% 31%, 37%, 38% 29%, 37%, 39% 12 e- rms 7 e- /s 100 e- /s Dark Current Doubling Temp. Photodiode VCCD Dynamic Range Charge Transfer Efficiency Blooming Suppression 7°C 9°C 64 d B 0.999999 > 300 X Smear Image Lag Maximum Pixel Clock Speed - 100 d B < 10 electrons 40 MHz Maximum Frame Rate Quad Output Dual Output Single Output 32 fps 16 fps 8 fps Package 68 Pin PGA Cover Glass AR Coated, 2 Sides or Clear Glass NOTE: All Parameters are specified at T = 40°C unless otherwise...