Datasheet4U Logo Datasheet4U.com

FSUSB42 - USB2.0 UART Switch

General Description

The FSUSB42 is a bi directional, low power, two port, high

speed, USB2.0 switch.

pole, double throw switch (DPDT) switch, it is optimized for switching between any combination of high speed (480 Mbps) or Full Spee

Key Features

  • an extremely low on capacitance (CON) of 3.7 pF. The wide bandwidth of this device (720 MHz) exceeds the bandwidth needed to pass the third harmonic, resulting in signals with minimum edge and phase distortion. Superior channel.
  • to.
  • channel crosstalk also minimizes interference. The FSUSB42 contains special circuitry on the switch I/O pins for.

📥 Download Datasheet

Datasheet Details

Part number FSUSB42
Manufacturer onsemi
File Size 305.46 KB
Description USB2.0 UART Switch
Datasheet download datasheet FSUSB42 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FSUSB42 USB2.0 (480Mbps) UART Switch Fairchild Semiconductor
FSUSB40 USB2.0 Switch Fairchild Semiconductor
FSUSB43 USB2.0 (480Mbps) Switch Fairchild Semiconductor
FSUSB45 USB2.0 (480Mbps) Switch Fairchild Semiconductor
FSUSB46 USB2.0 DPST Switch Fairchild Semiconductor

Other Datasheets by onsemi

Part Number Description
FSUSB43 USB2.0 Switch
FSUSB104 Low-Power Two-Port Hi-Speed USB2.0 Switch
FSUSB242UCX-Z002 Type-C USB Port Protection Switch
FSUSB63 3:1 High-Speed USB2.0 Switch/Multiplexer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Low-Power, Two-Port, High-Speed, USB2.0 (480 Mbps) UART Switch FSUSB42 Description The FSUSB42 is a bi−directional, low−power, two−port, high−speed, USB2.0 switch. Configured as a double−pole, double−throw switch (DPDT) switch, it is optimized for switching between any combination of high−speed (480 Mbps) or Full−Speed (12 Mbps) sources. The FSUSB42 is compatible with the requirements of USB2.0 and features an extremely low on capacitance (CON) of 3.7 pF. The wide bandwidth of this device (720 MHz) exceeds the bandwidth needed to pass the third harmonic, resulting in signals with minimum edge and phase distortion. Superior channel−to−channel crosstalk also minimizes interference.