• Part: FOD8316
  • Description: IGBT Drive Optocoupler
  • Category: Optocoupler
  • Manufacturer: onsemi
  • Size: 458.02 KB
Download FOD8316 Datasheet PDF
onsemi
FOD8316
FOD8316 is IGBT Drive Optocoupler manufactured by onsemi.
Description The FOD8316 is an advanced 2.5 A output current IGBT drive optocoupler capable of driving most 1200 V /150 A IGBTs. It is ideally suited for fast- switching driving of power IGBTs and MOSFETs used in motor- control inverter applications and high- performance power systems. The FOD8316 offers critical protection features necessary for preventing fault conditions that lead to destructive thermal runaway of IGBTs. The device utilizes onsemi’s proprietary OPTOPLANAR® coplanar packaging technology, and optimized IC design to achieve high noise immunity, characterized by high mon- mode rejection and power supply rejection specifications. The FOD8316 consists of an integrated gate drive optocoupler featuring low RDS(ON) CMOS transistors to drive the IGBT from rail- to- rail and an integrated high- speed isolated feedback for fault sensing. The device is housed in a pact 16- pin small- outline plastic package which meets the 8 mm creepage and clearance requirements. Features - High Noise Immunity Characterized by mon Mode Rejection - 35 k V/ms Minimum, VCM = 1500 VPEAK - 2.5 A Peak Output Current Driving Capability for Most 1200 V / 150 A IGBTs - Optically Isolated Fault Sensing Feedback - “Soft” IGBT Turn- off - Built- in IGBT Protection - Desaturation Detection - Under- Voltage Lockout (UVLO) Protection - Wide Supply Voltage Range: 15 V to 30 V - P- Channel MOSFETs at Output Stage Enables Output Voltage Swing Close to the Supply Rail (Rail- to- Rail Output) - 3.3 V / 5 V, CMOS/TTL patible Inputs - High Speed - 250 ns Maximum Propagation Delay Over Full Operating Temperature Range - Extended Industrial Temperate Range, - 40°C to 100°C - Safety and Regulatory Approvals - UL1577, 4,243 VRMS for 1 Minute - DIN EN/IEC 60747- 5- 5: 1,414 VPEAK Working Insulation Voltage Rating 8,000 VPEAK Transient Isolation Voltage Rating - RDS(ON) of 1 W (Typical) Offers Lower Power Dissipation MARKING DIAGRAM ON 8316 V D X YY KK J 8316 = Device Number, e.g., ‘8316’ for FOD8316 V = DIN EN/IEC60747-...