Datasheet4U Logo Datasheet4U.com

FAN54511 - Switch Mode Charger

Description

The FAN5451x family of chargers includes an I2C controlled 3.2 A USB compliant switch

mode charger.

Features

  • Fully Integrated, High.
  • Efficiency Charger for Single.
  • Cell Li.
  • Ion and Li.
  • Polymer Battery Packs.
  • Power Path Circuit ensures Fast System Startup with a Dead Battery.
  • 95% Charge Efficiency.
  • Charge Current Programmable up to 3.2 A.
  • 10 mV Float Voltage Accuracy.
  • 5% Charge Current Regulation Accuracy.
  • 5 V, 1.5 A Boost Mode for USB OTG.
  • 22 V DC Withstand Voltage on VBUS.
  • 13.25 V Maximum Input Operating Voltage.

📥 Download Datasheet

Datasheet Details

Part number FAN54511
Manufacturer onsemi
File Size 7.32 MB
Description Switch Mode Charger
Datasheet download datasheet FAN54511 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FAN5400 USB-Compliant Single Cell Li-Ion Switching Charger Fairchild Semiconductor
FAN5400 USB-Compliant Single-Cell Li-Ion Switching Charger Fairchild Semiconductor
FAN5401 USB-Compliant Single-Cell Li-Ion Switching Charger Fairchild Semiconductor
FAN54010 USB-Compliant Single Cell Li-Ion Switching Charger Fairchild Semiconductor
FAN54011 USB-Compliant Single Cell Li-Ion Switching Charger Fairchild Semiconductor

Other Datasheets by onsemi

Part Number Description
FAN54120 500mA USB Compatible Single Cell Li-Lon Linear Charger
FAN54161 Battery Charging IC
FAN5234 Dual Mobile-Friendly PWM/PFM Controller
FAN5236 Dual Mobile-Friendly DDR / Dual-Output PWM Controller
FAN53200 Digitally Programmable Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FAN54511 3.2 A Dual Input, Switch Mode Charger with Power Path Description The FAN5451x family of chargers includes an I2C controlled 3.2 A USB−compliant switch−mode charger. To facilitate fast system startup, the IC includes an optimized Power Path circuit which also accurately measures battery currents during charging and provides low impedance during discharge. The charging parameters and operating modes are programmable through an I2C Interface. Charge status is reported back to the host through the I2C port and the / STAT pin. The FAN5451x provides battery charging in three modes: Pre−Charge (IPP), Constant Current (CC) and Constant Voltage (CV). The charger can automatically restart the charge cycle when the battery falls below a restart voltage threshold.
Published: |