Datasheet4U Logo Datasheet4U.com

FAN49101 - Buck-Boost Regulator

Description

The FAN49101 is a high efficiency buck

regulator which accepts input voltages either above or below the regulated output voltage.

bridge architecture with synchronous rectification, the FAN49101 is capable of delivering up to 2 A while regulating the o

Features

  • 24 mA Typical PFM Quiescent Current.
  • Above 95% Efficiency.
  • Total Layout Area = 11.61 mm2.
  • Input Voltage Range: 2.5 V to 5.5 V.
  • I2C Compatible Interface.
  • 1.8 MHz Fixed.
  • Frequency Operation in PWM Mode.
  • Automatic / Seamless Step.
  • up and Step.
  • down Mode Transitions.
  • Forced PWM and Automatic PFM/PWM Mode Selection.
  • 0.5 mA Typical Shutdown Current.
  • Low Quiescent Current Pass.
  • Through.

📥 Download Datasheet

Datasheet preview – FAN49101

Datasheet Details

Part number FAN49101
Manufacturer ON Semiconductor
File Size 174.41 KB
Description Buck-Boost Regulator
Datasheet download datasheet FAN49101 Datasheet
Additional preview pages of the FAN49101 datasheet.

📁 Similar Datasheet

  • FAN49103 - I2C BuckBoost Regulator (Fairchild Semiconductor)
  • FAN4931 - Ultra-Low Cost - Rail To Rail I/O for CMOS Amplifier (Fairchild Semiconductor)
  • FAN400A - Low-Power Green-Mode PWM Flyback Power Controller (Fairchild Semiconductor)
  • FAN400C - PWM Flyback Power Controller (Fairchild Semiconductor)
  • FAN4010 - High-Side Current Sensor (Fairchild Semiconductor)
  • FAN4040 - Precision Micropower Shunt Voltage Reference (Fairchild Semiconductor)
  • FAN4041 - Precision Micropower Shunt Voltage Reference (Fairchild Semiconductor)
  • FAN4113 - 1.2V/ 36MHz/ Low Power Rail-to-Rail Amplifier (Fairchild Semiconductor)
  • FAN4147 - Ground Fault Interrupter (Fairchild Semiconductor)
  • FAN4149 - Ground Fault Interrupter (Fairchild Semiconductor)
Other Datasheets by ON Semiconductor

Full PDF Text Transcription

Click to expand full text
DATA SHEET www.onsemi.com Regulator - Buck-Boost, TinyPowerE, I2C, 2 A, 1.8 MHz WLCSP20 2.015x1.615x0.586 CASE 567QK FAN49101 Description The FAN49101 is a high efficiency buck−boost switching mode regulator which accepts input voltages either above or below the regulated output voltage. Using full−bridge architecture with synchronous rectification, the FAN49101 is capable of delivering up to 2 A while regulating the output at 3.4 V. The FAN49101 exhibits seamless transition between step−up and step−down modes reducing output disturbances. The output voltage and operation mode of the regulator can be programmed through an I2C interface. At moderate and light loads, Pulse Frequency Modulation (PFM) is used to operate the device in power−save mode to maintain high efficiency.
Published: |