ESD7L
ESD7L is ESD Protection Diode manufactured by onsemi.
Features
:
- Low Capacitance 0.5 p F Typical
- Low Clamping Voltage
- Small Body Outline Dimensions:
0.047” x 0.047” (1.20 mm x 1.20 mm)
- Low Body Height: 0.020- (0.5 mm)
- Stand- off Voltage: 5 V
- Low Leakage
- Response Time is Typically < 1.0 ns
- IEC61000- 4- 2 Level 4 ESD Protection
- S Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements; AEC- Q101 Qualified and PPAP Capable
- This is a Pb- Free Device
Mechanical Characteristics: CASE: Void-free, transfer-molded, thermosetting plastic Epoxy Meets UL 94 V- 0 LEAD FINISH: 100% Matte Sn (Tin) MOUNTING POSITION: Any QUALIFIED MAX REFLOW TEMPERATURE: 260C Device Meets MSL 1 Requirements
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
IEC 61000- 4- 2 (ESD)
Contact
10 k V
Total Power Dissipation on FR- 5 Board (Note 1) @ TA = 25C
Storage Temperature Range
Junction Temperature Range
Lead Solder Temperature
- Maximum (10 Second Duration)
PD
Tstg TJ TL
150 m W
- 55 to +150 C
- 55 to +150 C
C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. FR- 5 = 1.0 x 0.75 x 0.62 in.
Semiconductor ponents Industries, LLC, 2012
February, 2024
- Rev....
