Datasheet4U Logo Datasheet4U.com

CS8240 - High Side (PNP) Driver

Description

PACKAGE PIN # 5 Lead TO

220 1 2 3 4 5 PIN SYMBOL VCC OUT NC GND VIN FUNCTION Supply Voltage to the IC.

Supplies load current through PNP.

Collector of output PNP, current to load is sourced from this lead.

Features

  • Low Output Saturation Voltage.
  • 0.22 V at IOUT = 125 mA.
  • 0.33 V at IOUT = 225 mA.
  • Overmolded Package.
  • On.
  • Chip Flyback Diode.
  • Fault Protection.
  • Over Voltage Shutdown (32 V, typ).
  • Thermal Shutdown (165°C, typ).
  • Short Circuit Limiting (1.1 A typ).
  • 50 V Reverse Transient Protection.
  • 60 V Load Dump Protection.
  • Reverse Battery.
  • Low Quiescent Current (Off State).

📥 Download Datasheet

Datasheet Details

Part number CS8240
Manufacturer onsemi
File Size 85.91 KB
Description High Side (PNP) Driver
Datasheet download datasheet CS8240 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CS8240 500mA High Side (PNP) Driver with On-Chip Flyback Diode Cherry Semiconductor Corporation
CS8245 VGA Chipset Chips
CS8205 N-Channel Trench Power MOSFET CASS
CS8205E N-Channel Trench Power MOSFET CASS
CS8205G N-Channel Trench Power MOSFET CASS

Other Datasheets by onsemi

Part Number Description
CS8221 Low Dropout Linear Regulator
CS8101 Low Dropout Linear Regulator
CS8120 Linear Regulator
CS8122 Low Dropout Linear Regulator
CS8126 Low Dropout Linear Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com CS8240 500 mA High Side (PNP) Driver with On-Chip Flyback Diode The CS8240 is a fast, PNP high side driver capable of delivering up to 500 mA into a resistive or inductive load in harsh automotive or industrial environments. An internal flyback diode clamp is incorporated for inductive loads. The input (VIN) is TTL and CMOS compatible and has hysteresis to minimize the effects of noise. When the input is high, the output is on. When the input is low, the output is off and the supply voltage quiescent current is very low (< 1.0 µA, typ). For device protection, the CS8240 incorporates thermal shutdown, short circuit current limiting, overvoltage shutdown, and reverse battery protection. The CS8240 can withstand supply voltage transients of 60 V (min) and –50 V.
Published: |