Datasheet4U Logo Datasheet4U.com

CS5323 - Two-Phase Buck Controller

Description

PACKAGE PIN # 20 Lead SO Wide 1 2 3 PIN SYMBOL ROSC COMP VFB FUNCTION A resistor from this pin to ground sets operating frequency and VFB bias current.

Output of the error amplifier and input for the PWM comparators.

Voltage Feedback Pin.

Features

  • Enhanced V2 Control Method.
  • 5.
  • Bit DAC with 1.0% Tolerance.
  • Adjustable Output Voltage Positioning.
  • Programmable Frequency Set by Single Resistor.
  • 200 kHz to 800 kHz Operation (Per Phase).
  • Current Sensed through Sense Resistors, or Buck Inductors.
  • Adjustable Current Sense Threshold.
  • Hiccup Mode Current Limit.
  • Over.
  • Voltage Protection through Synchronous MOSFET’s.
  • Individual Current Limits for.

📥 Download Datasheet

Datasheet Details

Part number CS5323
Manufacturer onsemi
File Size 354.31 KB
Description Two-Phase Buck Controller
Datasheet download datasheet CS5323 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CS5320 24-Bit Variable Bandwidth A/D Converter Chipset Cirrus Logic
CS5321 24-Bit Variable Bandwidth A/D Converter Chipset Cirrus Logic
CS5322 24-Bit Variable Bandwidth A/D Converter Chipset Cirrus Logic
CS5326 Stereo A/D Converter Cirrus Logic
CS5327 Stereo A/D Converter Cirrus Logic

Other Datasheets by onsemi

Part Number Description
CS5322 Two-Phase Buck Controller
CS5301 Three-Phase Buck Controller
CS5302 Two-Phase Buck Controller
CS5303 Three-Phase Buck Controller
CS5304 Three-Phase Buck Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com CS5323 Three−Phase Buck Controller with 5−Bit DAC The CS5323 is a three−phase step down controller that incorporates all control functions required to power next generation processors. Proprietary multi−phase architecture guarantees balanced load current distribution and reduces overall solution cost in high current applications. Enhanced V2™ control architecture provides the fastest possible transient response, excellent overall regulation, and ease of use. The multi−phase architecture reduces input and output filter ripple, allowing for a reduction in filter size and inductor values with a corresponding increase in the output inductor current slew rate. Features • Enhanced V2 Control Method • 5−Bit DAC with 1.
Published: |