CS5204-2 Datasheet Text
CS5204- 2
4.0 A, 1.5 V Fixed Linear Regulator
The CS5204- 2 linear regulator provides 4.0 A @ 1.5 V with an accuracy of ±2.0%.
The fast loop response and low dropout voltage make this regulator ideal for GTL bus termination where low voltage operation and good transient response are important.
The circuit is designed to operate with dropout voltages as low as 1.0 V depending on the output current level. The maximum quiescent current is only 10 mA at full load.
The regulator is fully protected against overload conditions with protection circuitry for Safe Operating Area (SOA), overcurrent and thermal shutdown.
The regulator is available in TO- 220- 3 and surface mount D2PAK- 3 packages.
Features
- Output Current to 4.0 A
- Output Voltage Trimmed to ±2.0%
- Dropout Voltage (typical) 1.10 V @ 4.0 A
- Fast Transient Response
- Fault Protection Circuitry
- Thermal Shutdown
- Overcurrent Protection
- Safe Area Protection
VOUT VIN
Thermal Shutdown
Bandgap
Output Current
Limit
- + Error Amplifier
Figure 1. Block Diagram
GND http://onsemi.
TO- 220- 3
T SUFFIX
CASE 221A
Tab = VOUT Pin 1. GND
12 3
2. VOUT 3. VIN...