CM1411 Datasheet | onsemi

Description The CM1411 is a dual, low- pass filter array integrating two pi- style filters (C- R- C) that reduce EMI/RFI emissions while providing ESD protection. This part is custom- designed to interface with a speaker port on a cellular telephone or similar device. Each high quality filter provides more than 35 d B attenuation in the 800 to 2700 MHz range. These pi- style filters support bidirectional filtering that control EMI both to and from a speaker element. They also support AC signals with a cutoff frequency of 31 MHz, enabling audio signals to pass through without distortion. In addition, the CM1411 provides a very high level of protection for sensitive electronic ponents that may be subjected to electrostatic discharge (ESD). The CM1411 can safely dissipate ESD strikes of ±8 k V, the maximum requirement of the IEC 61000- 4- 2 international standard. Using the MIL- STD- 883 (Method 3015) specification for Human Body Model (HBM) ESD, the device provides protection for contact discharges to greater than ±15 k V. The CM1411 is particularly well- suited for portable electronics (e.g., cellular telephones, PDAs, notebook puters) because of its small package format and low weight. The CM1411 incorporates Opti Guardt coating which results in improved reliability at assembly and is available in a space- saving, low- profile Chip Scale Package with lead- free finishing. http://onsemi. WLCSP5 CP SUFFIX CASE 567AZ BLOCK DIAGRAM A1 SPKR_IN1 A3 SPKR_IN2 GND B2 10 W R 100 p F 100 p F 10 W R 100 p F 100 p F C1 SPKR_OUT1 C3 SPKR_OUT2 Features - Functionally and Pin patible with the CSPEMI201A - Opti Guardt Coated for Improved Reliability at Assembly - Two Channels of EMI Filtering - Pi- Style EMI Filters in a Capacitor- Resistor- Capacitor (C- R- C) Network - Greater than 40 d B Attenuation at 1 GHz - ±8 k V ESD Protection on Each Channel (IEC 61000- 4- 2 Level 4, Contact Discharge) - ±15 k V ESD Protection in Each Channel (HBM) - Supports AC Signals- Ideal for Audio Applications -...