CAT5270 Datasheet Text
CAT5270
Dual Digitally Programmable Potentiometers (DPP) with 256 Taps & I2C patible Interface
Description The CAT5270 is a volatile 256- tap by two channels, digitally programmable potentiometer (DPP) with an I2C patible interface. Each DPP consists of a linear taper series of resistive elements connected between two externally accessible end points. The tap points between each resistive element are connected to the wiper outputs with CMOS switches. On power up the wiper position goes to mid scale.
The CAT5270 can be used as a potentiometer or as a two terminal, variable resistor. It is available in a 14- lead TSSOP package operating over the industrial temperature range (- 40°C to 85°C).
Features
- Two Linear Taper Digitally Programmable Potentiometers
- 256 Resistor Taps per Potentiometer
- End to End Resistance 50 kW, 100 kW
- I2C patible Interface
- Low Wiper Resistance 75 W (typ.)
- 2.5 V to 5.5 V Operation
- Standby Current Less than 1 mA
- Power On to Mid Scale
- 14- lead TSSOP Package
- Industrial Temperature Range
RH0 RH1
SDA SCL
I2C PAT- 256- POSITION
IBLE
DECODE
INTERFACE CONTROL
RW0
RW1
A0
A1
CONTROL
A2
LOGIC
A3
RL0 RL1...