Datasheet4U Logo Datasheet4U.com

CAT25320 - 32-Kb SPI Serial EEPROM

Description

The CAT25320 is a EEPROM Serial 32

organized as 4096x8 bits.

Features

  • a 32.
  • byte page write buffer and supports the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial communication with the CAT25320 device. The device features software and hardware write protection, including partial as well as full array protection. Features.
  • 10 MHz SPI Compatible.

📥 Download Datasheet

Datasheet preview – CAT25320

Datasheet Details

Part number CAT25320
Manufacturer onsemi
File Size 288.81 KB
Description 32-Kb SPI Serial EEPROM
Datasheet download datasheet CAT25320 Datasheet
Additional preview pages of the CAT25320 datasheet.

📁 Similar Datasheet

  • CAT25320 - 32-Kb SPI Serial CMOS EEPROM (Catalyst Semiconductor)
  • CAT25 - Thick Film Chip Resistor Arrays (Bourns Electronic Solutions)
  • CAT25 - Thick Film Chip Resistor Arrays (Bourns Electronic)
  • CAT25010 - 1K/2K/4K SPI Serial CMOS EEPROM (Catalyst Semiconductor)
  • CAT25020 - 1K/2K/4K SPI Serial CMOS EEPROM (Catalyst Semiconductor)
  • CAT25040 - 1K/2K/4K SPI Serial CMOS EEPROM (Catalyst Semiconductor)
  • CAT25080 - (CAT25080 / CAT25160) 8-Kb and 16-Kb SPI Serial CMOS EEPROM (Catalyst Semiconductor)
  • CAT25160 - (CAT25080 / CAT25160) 8-Kb and 16-Kb SPI Serial CMOS EEPROM (Catalyst Semiconductor)
  • CAT25C01 - 1K/2K/4K/8K/16K SPI Serial CMOS E2PROM (Catalyst Semiconductor)
  • CAT25C02 - 1K/2K/4K/8K/16K SPI Serial CMOS E2PROM (Catalyst Semiconductor)
Other Datasheets by ON Semiconductor

Full PDF Text Transcription

Click to expand full text
EEPROM Serial 32-Kb SPI CAT25320 Description The CAT25320 is a EEPROM Serial 32−Kb SPI device internally organized as 4096x8 bits. This features a 32−byte page write buffer and supports the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial communication with the CAT25320 device. The device features software and hardware write protection, including partial as well as full array protection. Features • 10 MHz SPI Compatible • 1.8 V to 5.
Published: |