CAT25080 Datasheet | onsemi

Description The CAT25080/25160 are a EEPROM Serial 8/16- Kb SPI devices internally organized as 1024x8/2048x8 bits. They feature a 32- byte page write buffer and support the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are a clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial munication with the CAT25080/25160 device. These devices feature software and hardware write protection, including partial as well as full array protection. Features - 20 MHz SPI (5 V) patible - 1.8 V to 5.5 V Supply Voltage Range - SPI Modes (0,0) & (1,1) - 32- byte Page Write Buffer - Self- timed Write Cycle - Hardware and Software Protection - Block Write Protection - Protect 1/4, 1/2 or Entire EEPROM Array - Low Power CMOS Technology - 1,000,000 Program/Erase Cycles - 100 Year Data Retention - Industrial and Extended Temperature Range - 8- lead SOIC, TSSOP and 8- pad, UDFN Packages - These Devices are Pb- Free, Halogen Free/BFR Free, and Ro HS pliant CAT25160 HOLD SCK VSS Figure 1. Functional Symbol DATA SHEET .onsemi. SOIC- 8 V SUFFIX CASE 751BD TSSOP- 8 Y SUFFIX CASE 948AL UDFN- 8 HU4 SUFFIX CASE 517AZ PIN CONFIGURATION VCC HOLD SOIC (V), TSSOP (Y), UDFN (HU2, HU4) PIN FUNCTION Pin Name† Function Chip Select Serial Data...