Datasheet4U Logo Datasheet4U.com

AMIS-41683 - Fault Tolerant CAN Transceiver

Download the AMIS-41683 datasheet PDF. This datasheet also covers the AMIS-41682 variant, as both devices belong to the same fault tolerant can transceiver family and are provided as variant models within a single manufacturer datasheet.

Description

The new AMIS 41682 and AMIS

protocol controller and the physical wires of the bus lines in a control area network (CAN).

41683 is identical to the AMIS

41682 but has a true 3.3 V digital interface to the CAN controller.

Features

  • Fully Compatible with ISO11898.
  • 3 Standard EN 6 9 RTL.
  • Optimized for In.
  • Car Low.
  • speed Communication WAKE 7 8 RTH.
  • Baud Rate up to 125 kB.
  • Up to 32 Nodes can be Connected.
  • Due to Built.
  • in Slope Control function and a very Good Matching (Top View) PC20041029.1 of the CANL and CANH bus outputs, this device realizes a very low electromagnetic emission (EME).
  • Fully Integrated Receiver Filters.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (AMIS-41682_ONSemiconductor.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number AMIS-41683
Manufacturer onsemi
File Size 213.29 KB
Description Fault Tolerant CAN Transceiver
Datasheet download datasheet AMIS-41683 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AMIS-4168X Fault Tolerant CAN Transceiver AMI SEMICONDUCTOR
AMIS-40615 LIN Transceiver AMI SEMICONDUCTOR
AMIS-40616 LIN Transceiver AMI SEMICONDUCTOR
AMIS-42671 High-Speed CAN Transceiver AMI SEMICONDUCTOR
AMIS-42673 High-Speed CAN Transceiver AMI SEMICONDUCTOR

Other Datasheets by onsemi

Part Number Description
AMIS-41682 Fault Tolerant CAN Transceiver
AMIS-42665 High-Speed Low Power CAN Transceiver
AMIS-42670 High-Speed CAN Transceiver
AMIS-42671 High Speed Autobaud CAN Transceiver
AMIS-42700 Dual High Speed CAN Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AMIS-41682, AMIS-41683 Fault Tolerant CAN Transceiver Description The new AMIS−41682 and AMIS−41683 are interfaces between the protocol controller and the physical wires of the bus lines in a control area network (CAN). AMIS−41683 is identical to the AMIS−41682 but has a true 3.3 V digital interface to the CAN controller. The device provides differential transmit capability but will switch in error conditions to a single−wire transmitter and/or receiver. Initially it will be used for low speed applications, up to 125 kB, in passenger cars. Both AMIS−41682 and AMIS−41683 are implemented in I2T100 technology enabling both high−voltage analog circuitry and digital functionality to co−exist on the same chip.
Published: |