Datasheet4U Logo Datasheet4U.com

AMIS-30623 - Micro-stepping Motor Driver

Description

.

.

.

Features

  • Motordriver.
  • Micro.
  • stepping Technology.
  • Sensorless Step.
  • loss Detection.
  • Peak Current up to 800 mA.
  • Fixed Frequency PWM Current.
  • control.
  • Automatic Selection of Fast and Slow Decay Mode.
  • No external Fly.
  • back Diodes Required.
  • Compliant with 14 V Automotive Systems and Industrial Systems up to 24 V.
  • Motion Qualification Mode (Note 1) Controller with RAM and OTP Memory.
  • Position Controller.

📥 Download Datasheet

Datasheet Details

Part number AMIS-30623
Manufacturer onsemi
File Size 654.62 KB
Description Micro-stepping Motor Driver
Datasheet download datasheet AMIS-30623 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AMIS-30621 LIN Microstepping Motordriver AMI SEMICONDUCTOR
AMIS-30600 LIN Transceiver AMI SEMICONDUCTOR
AMIS-30660 High Speed CAN Transceiver AMI SEMICONDUCTOR
AMIS-30663 High Speed CAN Transceiver AMI SEMICONDUCTOR
AMIS-30521 Micro-stepping Motor Driver AMI SEMICONDUCTOR

Other Datasheets by onsemi

Part Number Description
AMIS-30621 Micro-Stepping Motor Driver
AMIS-30622 Micro-Stepping Motor Driver
AMIS-30624 Micro-Stepping Motor Driver
AMIS-30600 LIN Transceiver
AMIS-30660 High Speed CAN Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AMIS-30623 Micro-stepping Motor Driver INTRODUCTION The AMIS−30623 is a single−chip micro−stepping motordriver with position controller and control/diagnostic interface. It is ready to build dedicated mechatronics solutions connected remotely with a LIN master. The chip receives positioning instructions through the bus and subsequently drives the motor coils to the desired position. The on−chip position controller is configurable (OTP or RAM) for different motor types, positioning ranges and parameters for speed, acceleration and deceleration. The AMIS−30623 acts as a slave on the LIN bus and the master can fetch specific status information like actual position, error flags, etc. from each individual slave node.
Published: |