Datasheet4U Logo Datasheet4U.com

ADP3210 - 7-Bit Programmable Multiphase Mobile CPU Synchronous Buck Controller

General Description

Pin No.

Power Supply Enable Input.

output low.

Good Output.

operating range.

Key Features

  • 1.
  • , 2.
  • , or 3.
  • Phase Operation at Up to 1 MHz per Phase.
  • Input Voltage Range of 3.3 V to 22 V.
  • ±6 mV Worst.
  • Case Differential Sensing Error Overtemperature.
  • Interleaved PWM Outputs for Driving External High Power MOSFET Drivers.
  • Automatic Power.
  • Saving Modes Maximize Efficiency During Light Load and Deeper Sleep Operation.
  • Active Current Balancing Between Output Phases.
  • Independent Current Limit a.

📥 Download Datasheet

Datasheet Details

Part number ADP3210
Manufacturer onsemi
File Size 525.27 KB
Description 7-Bit Programmable Multiphase Mobile CPU Synchronous Buck Controller
Datasheet download datasheet ADP3210 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ADP320 High PSRR Voltage Regulator Analog Devices
ADP3203 2-Phase IMVP-II & IMVP-III Core Controller Analog Devices
ADP3204 3-Phase IMVP-II and IMVP-III Core Controller Analog Devices
ADP3205 Multiphase IMVP-IV Core Controller Analog Devices
ADP3206 2-/3-/4-Phase Synchronous Buck Controller Analog Devices

Other Datasheets by onsemi

Part Number Description
ADP3211 Synchronous Buck Controller
ADP3211A Synchronous Buck Controller
ADP3212 Mobile CPU Synchronous Buck Controller
ADP3212A Mobile CPU Synchronous Buck Controller
ADP3207 7-Bit Programmable Multiphase Mobile CPU Synchronous Buck Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ADP3210 7-Bit, Programmable, Multiphase Mobile CPU Synchronous Buck Controller The ADP3210 is a high efficiency, multiphase, synchronous, buck−switching regulator controller optimized for converting notebook battery voltage into the core supply voltage of high performance Intel processors. The part uses an internal 7−bit DAC to read Voltage Identification (VID) code directly from the processor that sets the output voltage. The phase relationship of the output signals can be configured for 1−, 2−, or 3−phase operation, with interleaved switching. The ADP3210 uses a multi−mode architecture to drive the logic−level PWM outputs at a switching frequency selected by the user depending on the output current requirement.