Datasheet4U Logo Datasheet4U.com

ADP3209D - Synchronous Buck Controller

Description

Description Feedback Return Input/Output.

This pin remotely senses the GMCH voltage.

It is also used as the ground return for the VID DAC and the voltage error amplifier blocks.

Features

  • Single.
  • Chip Solution.
  • Fully Compatible with the Intel® GMCH Chipset Voltage Regulator Specifications.
  • Integrated MOSFET Drivers.
  • Input Voltage Range of 3.3 V to 22 V.
  • ±8 mV Worst.
  • Case Differentially Sensed Core Voltage Error Overtemperature.
  • Automatic Power.
  • Saving Modes Maximize Efficiency During Light Load Operation.
  • Soft Transient Control Reduces Inrush Current and Audio Noise.
  • Independent Current.

📥 Download Datasheet

Datasheet Details

Part number ADP3209D
Manufacturer onsemi
File Size 452.55 KB
Description Synchronous Buck Controller
Datasheet download datasheet ADP3209D Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ADP320 High PSRR Voltage Regulator Analog Devices
ADP3203 2-Phase IMVP-II & IMVP-III Core Controller Analog Devices
ADP3204 3-Phase IMVP-II and IMVP-III Core Controller Analog Devices
ADP3205 Multiphase IMVP-IV Core Controller Analog Devices
ADP3206 2-/3-/4-Phase Synchronous Buck Controller Analog Devices

Other Datasheets by onsemi

Part Number Description
ADP3209 Synchronous Buck Controller
ADP3207 7-Bit Programmable Multiphase Mobile CPU Synchronous Buck Controller
ADP3207C CPU Synchronous Buck Controller
ADP3207D 7-Bit Programmable Multi-Phase Mobile CPU Synchronous Buck Controller
ADP3208 Synchronous Buck Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ADP3209D 5-Bit, Programmable, Single-Phase, Synchronous Buck Controller The ADP3209D is a highly efficient, single−phase, synchronous buck switching regulator controller. With its integrated drivers, the ADP3209D is optimized for converting the notebook battery voltage to render the supply voltage required by high performance Intel chipsets. An internal 5−bit DAC is used to read a VID code directly from the chipset and to set the GMCH core voltage to a value within the range of 0.4 V to 1.25 V. The ADP3209D uses a multi−mode architecture. It provides programmable switching frequency that can be optimized for efficiency depending on the output current requirement.
Published: |