Datasheet4U Logo Datasheet4U.com

MBF9046BC - SAW Antenna Duplexer

General Description

The MBF9046BC is the SAW antenna duplexer for the frequency range of 700 to 1000 MHz.

This SAW Duplexer integrates RF filters at Tx and Rx side, and matching circuit into PKG.

This helps to save the space and weight greatly in the target application such as mobile telephone.

Key Features

  • Complying Standard AMPS, IS-95, IS-136.
  • Small package: 5mm x 5mm & less than 1.85 mm in height.
  • PKG I/O Impedance: 50 Ω.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MBF005 Single-Phase Glass Passivated Silicon Bridge Rectifier SEMTECH
MBF01 Single-Phase Glass Passivated Silicon Bridge Rectifier SEMTECH
MBF02 Single-Phase Glass Passivated Silicon Bridge Rectifier SEMTECH
MBF04 Single-Phase Glass Passivated Silicon Bridge Rectifier SEMTECH
MBF06 Single-Phase Glass Passivated Silicon Bridge Rectifier SEMTECH

Other Datasheets by OKI Electric

Part Number Description
MBF9041BB SAW Antenna Duplexer (700 to 1000 MHz)
MBF9042BB SAW Antenna Duplexer
MBF9045BB SAW Antenna Duplexer
MBF9045BC SAW Antenna Duplexer
MBF9402B SAW Band Pass Filter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com OKI Semiconductor MBF9046BC SAW Antenna Duplexer (700 to 1000 MHz) FEDW9046BC-01 Issue Date: July. 2. 2002 GENERAL DESCRIPTION The MBF9046BC is the SAW antenna duplexer for the frequency range of 700 to 1000 MHz. This SAW Duplexer integrates RF filters at Tx and Rx side, and matching circuit into PKG. This helps to save the space and weight greatly in the target application such as mobile telephone. This SAW Duplexer has very low insertion loss by using high quality package. Due to high harmonics characteristics, total number of components at RF circuit can be minimized. Thanks to high isolation performance, high sensitivity can be expected. Low insertion loss at Tx saves the power consumption of mobile telephone which prolong the battery life.