Datasheet4U Logo Datasheet4U.com

NT7501 - 33 X 100 RAM-Map LCD Controller/Driver

Description

The NT7501 is a single-chip LCD driver for dot-matrix liquid crystal displays, which is directly connectable to a microcomputer bus.

It accepts 8-bit serial or parallel display data directly sent from a microcomputer and stores it in an on-chip display RAM.

Features

  • ! Direct RAM data display using the display RAM. When RAM data bit is 0, it is not displayed. When RAM data bit is 1, it is displayed. (In normal display mode) ! RAM capacity: 65 X 132 = 8580 bits ! Many command functions: Read/Write Display Data, Display ON/OFF, Normal/Reverse Display, Page Address Set, Set Display Start Line, Set LCD Bias, Electronic contrast Controls, Read Modify Write, Select Segment Driver Direction and Power Save ! High-speed 8-bit microprocessor interface allowing direct.

📥 Download Datasheet

Datasheet preview – NT7501

Datasheet Details

Part number NT7501
Manufacturer Novatek
File Size 357.93 KB
Description 33 X 100 RAM-Map LCD Controller/Driver
Datasheet download datasheet NT7501 Datasheet
Additional preview pages of the NT7501 datasheet.

📁 Similar Datasheet

  • NT75 - Forward Relay (Ningbo)
  • NT75-1 - (NT75-1 / NT75-2) Low coil consumption (DB Lectro)
  • NT75-1A-x - Forward Relay (Ningbo)
  • NT75-1C-x - Forward Relay (Ningbo)
  • NT75-2 - (NT75-1 / NT75-2) Low coil consumption (DB Lectro)
  • NT75-2A-x - Forward Relay (Ningbo)
  • NT75-2C-x - Forward Relay (Ningbo)
  • NT75-A-x - Forward Relay (Ningbo)
  • NT75-C-S - Forward Relay (Ningbo)
  • NT75-C-x - Forward Relay (Ningbo)
Other Datasheets by Novatek
  • NT7502 - 65 X 132 RAM-Map LCD Controller / Driver
  • NT7532 - 65 x 132 RAM-Map LCD Controller/Driver
  • NT7534 - 132 x 65 RAM-Map STN LCD Controller/Driver
  • NT7538 - 132 x 65 RAM-Map STN LCD Controller/Driver
  • NT75451 - 132 X 65 RAM-Map STN LCD
  • NT7553E - 396 x 162 RAM-Map STN LCD Controller/Driver
  • NT7181 - LVDS Transmitter 24 Bit Color Host-LCD Display Panel Interface
  • NT7603 - Single-Chip 16C x 2L Dot-Matrix LCD Controller / Driver

Full PDF Text Transcription

Click to expand full text
NT7501 33 X 100 RAM-Map LCD Controller/Driver Features ! Direct RAM data display using the display RAM. When RAM data bit is 0, it is not displayed. When RAM data bit is 1, it is displayed. (In normal display mode) ! RAM capacity: 65 X 132 = 8580 bits ! Many command functions: Read/Write Display Data, Display ON/OFF, Normal/Reverse Display, Page Address Set, Set Display Start Line, Set LCD Bias, Electronic contrast Controls, Read Modify Write, Select Segment Driver Direction and Power Save ! High-speed 8-bit microprocessor interface allowing direct connection to both the 8080 and 6800 ! Serial interface ! Single supply operation, 2.4 - 3.
Published: |