PLX1V390MCL1 Datasheet | Nichicon

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS PLX Radial Lead Type, Long Life Assurance High reliability, High voltage (to 50V). Low ESR, High ripple current. Long life of 3000 hours at 125°C. Radial lead type: Lead free flow soldering condition correspondence. Adapted to the Ro HS directive (2011/65/EU). Higher Temperature Specifications Item Performance Characteristics Category Temperature Range - 55 to +125°C Rated Voltage Range 16 to 50V Rated Capacitance Range 22 to 390µF Capacitance Tolerance ± 20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100k Hz, 20°C Leakage Current ( 2) Less than or equal to the specified value. After 2 minutes' application of rated voltage at 20°C Temperature Characteristics (Max.Impedance Ratio) Z+125°C / Z+20°C 1.25 (100k Hz) Z- 55°C / Z+20°C 1.25 Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 3000 hours at 125°C. Capacitance change tan δ ESR ( 1) Leakage current ( 2) Within ± 20% of initial value ( 3) 150% or less of the initial specified value 150% or less of the initial specified value Less than or equal to the initial specified value Damp Heat (Steady State) The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60°C, 90% RH. Capacitance change tan δ ESR ( 1) Leakage current ( 2) Within ± 20% of initial value ( 3) 150% or less of the initial specified value 150% or less of the initial specified value Less than or equal to the initial specified value Resistance to Soldering...