F971A156MBA Datasheet | Nichicon

SOLID TANTALUM ELECTROLYTIC CAPACITORS F97 Resin-molded Chip, High Reliability (High temperature / moisture resistance) Series Specifications Item Category Temperature Range Capacitance Tolerance Performance Characteristics --55 to +125˚C (Rated temperature : +85˚C) ± 20%, ± 10% (at 120Hz) Refer to next page Refer to next page pliant to the Ro HS directive (2002/95/EC). pliant to AEC-Q200. Dissipation Factor ESR (100k Hz) Leakage Current∗ - After 1 minute' s application of rated voltage,leakage current at 20˚C is not more than 0.01CV or 0.5µA, whichever is greater. - After 1 minute' s application of rated voltage,leakage current at 85˚C is not more than 0.1CV or 5µA,whichever is greater. - After 1 minute' s application of derated voltage,leakage current at 125˚C is not more than 0.125CV or 6.3µA,whichever is greater. +15% Max. (at +125˚C) +10% Max. (at +85˚C) --10% Max. (at --55˚C) At 85˚C, 85% R.H.,For 1000 hours (No voltage applied) Capacitance Change - - - - - - Within ±10% of the initial value Dissipation Factor - - - - - - - - - - - Initial specified value or less Leakage Current - - - - - - - - - - - - 125% or less than the initial specified value After 500 hour' s application of rated voltage in series with a 33Ω resistor at 60˚C, 90 to 95% R.H.,capacitors meet the characteristics requirements table below. Capacitance Change - - - - - - Within ±10% of the initial value Dissipation Factor - - - - - - - - - - Initial specified value or less Leakage Current - - - - - - - -...