Datasheet4U Logo Datasheet4U.com

NJW4832 - 1-channel High Side Switch

Description

The NJW4832 is the single high-side switch that can supply 0.2A.

The active clamp circuit, overcurrent and thermal shutdown are built-in to Pch MOS FET.

A logic signal (3V/5V) can be input directly.

Features

  • S.
  • Drain-Source Voltage 45V.
  • Output Current 0.2A.
  • Corresponding with Logic Voltage Operation: 3V/5V.
  • Low On-Resistance 0.75 (typ. ).
  • Low Consumption Current 110A (typ. ).
  • Active Clamp Circuit.
  • Over Current Protection (Self recovery type current limiting function).
  • Thermal Shutdown.
  • Package Outline DFN6-H1 (ESON6-H1).
  • PIN.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NJW4832 1-channel High Side Switch  GENERAL DESCRIPTION The NJW4832 is the single high-side switch that can supply 0.2A. The active clamp circuit, overcurrent and thermal shutdown are built-in to Pch MOS FET. A logic signal (3V/5V) can be input directly. Especially, the NJW4832 is suitable for various Sensors output block as PNP type. The FLT logic has two versions: Active-high (A-ver) and Active-low (B-ver). Also, The NJW4832 is a complementary product to the NJW4822.  PACKAGE OUTLINE NJW4832KH1  FEATURES  Drain-Source Voltage 45V  Output Current 0.2A  Corresponding with Logic Voltage Operation: 3V/5V  Low On-Resistance 0.75 (typ.)  Low Consumption Current 110A (typ.