Datasheet4U Logo Datasheet4U.com

NJM2519A - RF Modulator

Description

The NJM2519A is a RF modulator IC especially designed for VHF band RF modulator and consists of video clamp circuit, white clip circuit, video AM modulator and audio FM modulator, built into one chip.

Features

  • S.
  • Operating Voltage 5V.
  • VHF Oscillator on chip.
  • Regulator on chip.
  • Bipolar Technology.
  • Package Outline: DMP8 NJM2519AM.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NJM2512A 47uF AC-Coupling Capacitor Low Voltage Video Driver NJR
NJM2515 3-INPUT 1OUTPUT 3ch VIDEO AMPLIFIER JRC
NJM2517 COLOR TFT SIGNAL PROCESSOR RGB INTERFACE IC JRC
NJM2504 Video Differential Output Driver NJR Corporation
NJM2505 Isolation Amplifier NJR Corporation

Other Datasheets by New Japan Radio

Part Number Description
NJM2512 AC-Coupling Capacitor Low Voltage Video Driver
NJM2513 3-INPUT/2-INPUT VIDEO SWITCH
NJM2516 AC-Coupling Capacitor Wide Band 3ch Video Driver
NJM2503 3-INPUT/2-INPUT VIDEO SWITCH
NJM2506 3-INPUT/2-INPUT VIDEO SWITCH

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NJM2519A RF Modulator for VHF Band „ DESCRIPTION The NJM2519A is a RF modulator IC especially designed for VHF band RF modulator and consists of video clamp circuit, white clip circuit, video AM modulator and audio FM modulator, built into one chip. „ FEATURES • Operating Voltage 5V • VHF Oscillator on chip • Regulator on chip • Bipolar Technology • Package Outline: DMP8 NJM2519AM „ PACKAGE OUTLINE „ BLOCK DIAGRAM REG OUT OSC 8 7 6 RF OSC REGULATOR AUDIO FM MODULATOR MIXER CLAMP & WHITE CLIP 1 RF OUT 2 GND 3 VIDEO IN 4.