Datasheet4U Logo Datasheet4U.com

SCAN90CP02 - 1.5 Gbps 2x2 LVDS Crosspoint Switch

General Description

The SCAN90CP02 is a 1.5 Gbps 2 x 2 LVDS crosspoint switch.

High speed data paths and flow-through pinout minimize internal device jitter, while configurable 0/25/50/100% pre-emphasis overcomes external ISI jitter effects of lossy backplanes and cables.

Key Features

  • 1.5 Gbps per channel.
  • Low power: 70 mA in dual repeater mode @1.5 Gbps.
  • Low output jitter.
  • Configurable 0/25/50/100% pre-emphasis drives lossy backplanes and cables.
  • Non-blocking architecture allows 1:2 splitter, 2:1 mux, crossover, and dual buffer configurations.
  • Flow-through pinout.
  • LVDS/BLVDS/CML/LVPECL inputs, LVDS Outputs.
  • IEEE 1149.1 and 1149.6 compliant.
  • Single 3.3V supply.
  • Separate control of inputs and outputs allows for power savings.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SCAN90CP02 1.5 Gbps 2x2 LVDS Crosspoint Switch Texas Instruments
SCAN921023 20-66 MHz 10-Bit Bus LVDS Serializer and Deserializer Texas Instruments
SCAN921025 30-80 MHz 10-Bit Bus LVDS Serializer and Deserializer Texas Instruments
SCAN921025H High Temperature 20-80 MHz 10-Bit Bus LVDS SerDes Texas Instruments
SCAN921224 20-66 MHz 10-Bit Bus LVDS Serializer and Deserializer Texas Instruments

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
SCAN90004 4-Channel LVDS Buffer/Repeater
SCAN921023 20-66 MHz 10 Bit Bus LVDS Serializer and Deserializer
SCAN921025 30-80 MHz 10-Bit Bus LVDS Serializer and Deserializer
SCAN921025H High Temperature 20-80 MHz 10 Bit Bus LVDS SerDes
SCAN921224 20-66 MHz 10 Bit Bus LVDS Serializer and Deserializer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SCAN90CP02 1.5 Gbps 2x2 LVDS Crosspoint Switch with Pre-Emphasis and IEEE 1149.6 May 2007 SCAN90CP02 1.5 Gbps 2x2 LVDS Crosspoint Switch with Pre-Emphasis and IEEE 1149.6 General Description The SCAN90CP02 is a 1.5 Gbps 2 x 2 LVDS crosspoint switch. High speed data paths and flow-through pinout minimize internal device jitter, while configurable 0/25/50/100% pre-emphasis overcomes external ISI jitter effects of lossy backplanes and cables. The differential inputs interface to LVDS and Bus LVDS signals such as those on National's 10-, 16-, and 18- bit Bus LVDS SerDes, as well as CML and LVPECL. The SCAN90CP02 can also be used with ASICs and FPGAs.