Datasheet4U Logo Datasheet4U.com

LMS5213 - 80mA / uCap / Low Dropout Voltage Regulator

Description

The LMS5213 is a µCap, low dropout voltage regulator with very low quiescent current, 220µA typical, at 80mA load.

It also has very low dropout voltage, typically 20mV at light load and 330mV at 80mA.

The LMS5213 provides up to 80mA and consumes a typical of 1µA in disable mode.

Features

  • n n n n n n n n n n Space saving SC70 package Available in 2.8V, 3.0V, and 3.3V fixed voltages Guaranteed 80mA output Low quiescent current Low dropout voltage Low temperature coefficient Current and thermal limiting Logic-controlled shutdown Stability with low-ESR ceramic capacitors Pin-to-pin replacement for Mic™ 5213.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LMS5214 80mA Low Dropout Voltage Regulator Texas Instruments
LMS501KF03 LCD Samsung
LMS0192A LCD Module Shenzhen
LMS0192A-2 LCD Module Shenzhen
LMS0192B LCD Module Shenzhen

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
LMS5214 80mA / Low Dropout Voltage Regulator
LMS5258 150mA Low Dropout Voltage Regulator
LMS1485 5V Low Power RS-485 Differential Bus Transceiver
LMS1487 5V Low Power RS-485 / RS-422 Differential Bus Transceiver
LMS1487E Low Power RS-485 / RS-422 Differential Bus Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LMS5213 80mA, µCap, Low Dropout Voltage Regulator in SC70 January 2004 LMS5213 80mA, µCap, Low Dropout Voltage Regulator in SC70 General Description • The LMS5213 is a µCap, low dropout voltage regulator with very low quiescent current, 220µA typical, at 80mA load. It also has very low dropout voltage, typically 20mV at light load and 330mV at 80mA. The LMS5213 provides up to 80mA and consumes a typical of 1µA in disable mode. The LMS5213 is optimized to work with low value, low cost ceramic capacitors. The output typically require only 0.47µF of output capacitance for stability. The enable pin can be tied to VIN for easy device layout. The LMS5213 is designed for portable, battery powered equipment applications with small space requirements.
Published: |