Datasheet4U Logo Datasheet4U.com

LMS1487 - 5V Low Power RS-485 / RS-422 Differential Bus Transceiver

General Description

The LMS1487 is a low power differential bus/line transceiver designed for high speed bidirectional data communication on multipoint bus transmission lines.

It is designed for balanced transmission lines.

Key Features

  • Meet ANSI standard RS-485-A and RS-422-B.
  • Data rate 2.5 Mbps.
  • Single supply voltage operation, 5V.
  • Wide input and output voltage range.
  • Thermal shutdown protection.
  • Short circuit protection.
  • Low quiescent current 320μA.
  • Allows up to 128 transceivers on the bus.
  • Open circuit fail-safe for receiver.
  • Extended operating temperature range.
  • 40°C to 85°C.
  • Drop-in replacement to MAX1487.
  • Available in 8-pin SOIC and 8-pin DIP package Ap.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LMS1485 5V Low Power RS-485 Differential Bus Transceiver Texas Instruments
LMS14 Low Profile Surface Mount Schottky Bridge Rectifiers GOOD-ARK
LMS12 12-bit Cascadable Multiplier LOGIC Devices Incorporated
LMS12 Low Profile Surface Mount Schottky Bridge Rectifiers GOOD-ARK
LMS12JC35 12-bit Cascadable Multiplier LOGIC Devices Incorporated

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
LMS1487E Low Power RS-485 / RS-422 Differential Bus Transceiver
LMS1485 5V Low Power RS-485 Differential Bus Transceiver
LMS1585 5A and 3A Low Dropout Fast Response Regulators
LMS1585A 5A and 3A Low Dropout Fast Response Regulators
LMS1585AEP Enhanced Plastic 5A and 3A Low Dropout Fast Response Regulators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LMS1487 5V Low Power RS-485 / RS-422 Differential Bus Transceiver LMS1487 OBSOLETE October 12, 2011 5V Low Power RS-485 / RS-422 Differential Bus Transceiver General Description The LMS1487 is a low power differential bus/line transceiver designed for high speed bidirectional data communication on multipoint bus transmission lines. It is designed for balanced transmission lines. It meets ANSI Standards TIA/EIA RS422B, TIA/EIA RS485-A and ITU recommendation and V.11 and X.27. The LMS1487 combines a TRI-STATE® differential line driver and differential input receiver, both of which operate from a single 5.0V power supply. The driver and receiver have an active high and active low, respectively, that can be externally connected to function as a direction control.