Datasheet4U Logo Datasheet4U.com

LMH6658 - 270MHz Single Supply Single/Dual Amplifiers

Description

The LMH6657/6658 are low-cost operational amplifiers that operate from a single supply with input voltage range extending below the V

.

Features

  • VS = 5V, TA = 25˚C, RL = 100Ω (Typical values unless specified) n.
  • 3dB BW (AV = +1) 270MHz n Supply voltage range 3V to 12V n Slew rate, (VS = ± 5V) 700V/µs n Supply current 6.2mA/amp n Output current +80/.
  • 90mA n Input common mode volt. 0.5V beyond V.
  • , 1.7V from V+ n Output voltage swing (RL = 2kΩ) 0.8V from rails n Input voltage noise 11nV/ n Input current noise 2.1pA/ n DG error 0.03% n DP error 0.10˚ n THD (5MHz).
  • 55dBc n Settling time (0.1%) 37ns n Fully chara.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LMH6658 270-MHz Single Supply Single/Dual Amplifiers Texas Instruments
LMH6654 Low Noise Amplifiers Texas Instruments
LMH6655 Low Noise Amplifiers Texas Instruments
LMH6657 270-MHz Single Supply Single/Dual Amplifiers Texas Instruments
LMH6601 2.4-V CMOS Operational Amplifier Texas Instruments

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
LMH6654 Single/Dual Low Power / 250 MHz / Low Noise Amplifiers
LMH6655 Single/Dual Low Power / 250 MHz / Low Noise Amplifiers
LMH6657 270MHz Single Supply Single/Dual Amplifiers
LMH6601 2.4V CMOS Op Amp
LMH6609 900MHz Voltage Feedback Op Amp

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LMH6657/LMH6658 270MHz Single Supply, Single & Dual Amplifiers October 2004 LMH6657/LMH6658 270MHz Single Supply, Single & Dual Amplifiers General Description The LMH6657/6658 are low-cost operational amplifiers that operate from a single supply with input voltage range extending below the V−. Based on easy to use voltage feedback topology and boasting fast slew rate (700V/µs) and high speed (140MHz GBWP), the LMH6657 (Single) and LMH6658 (dual) can be used in high speed large signal applications. These applications include instrumentation, communication devices, set-top boxes, etc. With a -3dB BW of 100MHz (AV = +2) and DG & DP of 0.03% & 0.10˚ respectively, the LMH6657/6658 are well suited for video applications.