Datasheet4U Logo Datasheet4U.com

LM628 - Precision Motion Controller

Description

The LM628/LM629 are dedicated motion-control processors designed for use with a variety of DC and brushless DC servo motors, and other servomechanisms which provide a quadrature incremental position feedback signal.

Features

  • n n n n n n n n n n n n 32-bit position, velocity, and acceleration registers Programmable digital PID filter with 16-bit coefficients Programmable derivative sampling interval 8- or 12-bit DAC output data (LM628) 8-bit sign-magnitude PWM output data (LM629) Internal trapezoidal velocity profile generator Velocity, target position, and filter parameters may be changed during motion Position and velocity modes of operation Real-time programmable host interrupts 8-bit parallel asynchronous host in.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM628 Precision Motion Controller Texas Instruments
LM62 SOT-23 Temperature Sensor Texas Instruments
LM6206N3 Low Dropout CMOS Voltage Regulators CYStech Electronics
LM6211 RRO Operational Amplifier Texas Instruments
LM62460-Q1 Automotive Buck Converter Texas Instruments

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
LM62 2.7V/ 15.6 mV/C SOT-23 Temperature Sensor
LM621 LM621 Brushless Motor Commutator
LM6211 RRO Operational Amplifier
LM6218 Fast Settling Dual Operational Amplifiers
LM6221 High Speed Buffer

Full PDF Text Transcription

Click to expand full text
LM628/LM629 Precision Motion Controller November 1999 LM628/LM629 Precision Motion Controller General Description The LM628/LM629 are dedicated motion-control processors designed for use with a variety of DC and brushless DC servo motors, and other servomechanisms which provide a quadrature incremental position feedback signal. The parts perform the intensive, real-time computational tasks required for high performance digital motion control. The host control software interface is facilitated by a high-level command set. The LM628 has an 8-bit output which can drive either an 8-bit or a 12-bit DAC. The components required to build a servo system are reduced to the DC motor/actuator, an incremental encoder, a DAC, a power amplifier, and the LM628.
Published: |