Datasheet4U Logo Datasheet4U.com

LM306 - Voltage Comparator

Description

The LM106 series are high-speed voltage comparators designed to accurately detect low-level analog signals and drive a digital load.

They are equivalent to an LM710, combined with a two input NAND gate and an output buffer.

The circuits can drive RTL, DTL or TTL integrated circuits directly.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM306 Differential Comparator With Strobes (Rev. A) ETCTI
LM30-3015PC Sensors Greegoo
LM30-3015PC Sensors ETC
LM300 Voltage Regulator Intersil
LM3000 Dual Synchronous Emulated Current-Mode Controller Texas Instruments

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
LM300 Voltage Regulator
LM3000 Dual Synchronous Emulated Current Mode Controller
LM3001 Primary Side PWM Driver
LM301 Operational Amplifiers
LM301A Operational Amplifiers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM106/LM306 LM106/LM306 Voltage Comparator December 1994 LM106/LM306 Voltage Comparator General Description The LM106 series are high-speed voltage comparators designed to accurately detect low-level analog signals and drive a digital load. They are equivalent to an LM710, combined with a two input NAND gate and an output buffer. The circuits can drive RTL, DTL or TTL integrated circuits directly. Furthermore, their outputs can switch voltages up to 24V at currents as high as 10 mA. The devices have short-circuit protection which limits the inrush current when it is used to drive incandescent lamps, in addition to preventing damage from accidental shorts to the positive supply. The speed is equivalent to that of an LM710.