Datasheet4U Logo Datasheet4U.com

LM2433 - Monolithic Single Channel 16 MHz EDTV CRT Driver

Description

The LM2433 is a single channel high voltage CRT driver circuit designed for use in Rear-Projection and Direct-View EDTV applications.

The IC contains a high input impedance, wide band amplifier which can be DC coupled to a cathode of a CRT.

53 an

Features

  • n n n n n 16 MHz bandwith at 110VPP output swing 0V to 4V input range Greater than 110VPP output swing capability IK Current Output (pin 5) for IK feedback systems Emitter (pin 6) access to increase voltage gain.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM2432 LM2432 220V Monolithic Single Channel 37 MHz HDTV CRT Driver (Rev. E) ETCTI
LM2436 Monolithic Triple 7.5ns CRT Driver Texas Instruments
LM24010J Display Module Sharp
LM24010Z LCD Dot Matrix Unit Sharp
LM240120BCW LCD Module User Manual TOPWAY

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
LM2432 220V Monolithic Single Channel 37 MHz HDTV CRT Driver
LM2435 Monolithic Triple 5.5 ns CRT Driver
LM2435T Monolithic Triple 5.5 ns CRT Driver
LM2436 Monolithic Triple 7.5 ns CRT Driver
LM2437 Monolithic Triple 7.5 ns CRT Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com LM2433 220V Monolithic Single Channel 16 MHz EDTV CRT Driver November 2005 LM2433 220V Monolithic Single Channel 16 MHz EDTV CRT Driver General Description The LM2433 is a single channel high voltage CRT driver circuit designed for use in Rear-Projection and Direct-View EDTV applications. The IC contains a high input impedance, wide band amplifier which can be DC coupled to a cathode of a CRT. The amplifier has its gain internally set to −53 and can drive CRT capacitive loads as well as resistive loads present in other applications, limited only by the package’s power dissipation. The IC is packaged in a staggered 7-lead TO-220 molded plastic power package designed specifically to meet high voltage spacing requirements.