Datasheet4U Logo Datasheet4U.com

LM1229 - I2C Compatible CMOS TV RGB and Deflection Processor

General Description

The LM1229 pre-amp is an integrated CMOS CRT RGB preamp plus horizontal and vertical deflection processing with an I2C compatible interface for controlling all the parameters necessary to directly adjust the gain, contrast and brightness and geometry of the CRT display.

Key Features

  • n Fully bus controllable via an I2C compatible interface. n Contrast control for simultaneously adjusting the RGB output peak to peak levels. n Gain controls for aligning the CRT color temperature.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM1229 I2C Compatible CMOS TV RGB and Deflection Processor Texas Instruments
LM12232ABY LCD Module User Manual TOPWAY
LM12232BBY LCD Module User Manual TOPWAY
LM120 1.5 AMP NEGATIVE VOLTAGE REGULATOR Seme LAB
LM120 3-Terminal Negative Regulators Texas Instruments

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
LM122 Precision Timers
LM120 3-Terminal Negative Regulators
LM1201 Video Amplifier System
LM1202 230MHz Video Amplifier System
LM1203 RGB Video Amplifier System

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com LM1229 I2C Compatible CMOS TV RGB and Deflection Processor June 2005 LM1229 I2C Compatible CMOS TV RGB and Deflection Processor General Description The LM1229 pre-amp is an integrated CMOS CRT RGB preamp plus horizontal and vertical deflection processing with an I2C compatible interface for controlling all the parameters necessary to directly adjust the gain, contrast and brightness and geometry of the CRT display. In the RGB section, the CRT bias is controlled by the three DAC outputs which are matched to the LM248x integrated bias clamp ICs. The brightness control operates on the video channels rather than the bias channels and is designed to maintain the CRT color temperature through the full range of adjustment.