Datasheet4U Logo Datasheet4U.com

DS96176CN - RS-485/RS-422 Differential Bus Transceiver

Download the DS96176CN datasheet PDF. This datasheet also covers the DS96176 variant, as both devices belong to the same rs-485/rs-422 differential bus transceiver family and are provided as variant models within a single manufacturer datasheet.

Description

The DS96176 Differential Bus Transceiver is a monolithic integrated circuit designed for bidirectional data communication on balanced multipoint bus transmission lines.

The transceiver meets EIA Standard RS-485 as well as RS-422A.

Features

  • positive and negative current-limiting and thermal shutdown for protection from line fault conditions. Thermal shutdown is designed to occur at junction temperature of approximately 160˚C. The receiver features a typical input impedance of 15 kΩ, an input sensitivity of ±200 mV, and a typical input hysteresis of 50 mV. The DS96176 can be used in transmission line.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (DS96176_NationalSemiconductor.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
DS9610B High Voltage Synchronous Rectified Buck MOSFET Driver Richtek
DS9638QML DS9638QML RS-422 Dual High Speed Differential Line Driver (Rev. A) ETCTI
DS96F172MQML DS96F172MQML/DS96F174MQML EIA-485/EIA-422 Quad Differential Drivers (Rev. A) ETCTI
DS96F173MQML DS96F173MQML/DS96F175MQML EIA-485/EIA-422 Quad Differential Receivers (Rev. A) ETCTI
DS96F174MQML DS96F172MQML/DS96F174MQML EIA-485/EIA-422 Quad Differential Drivers (Rev. A) ETCTI

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
DS96176 RS-485/RS-422 Differential Bus Transceiver
DS96172 RS-485/RS-422 Quad Differential Line Drivers
DS96173 RS-485/RS-422 Quad Differential Line Receivers
DS96174 RS-485/RS-422 Quad Differential Line Drivers
DS96175 Quad Differential Line Receivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DS96176 RS-485/RS-422 Differential Bus Transceiver May 1998 DS96176 RS-485/RS-422 Differential Bus Transceiver General Description The DS96176 Differential Bus Transceiver is a monolithic integrated circuit designed for bidirectional data communication on balanced multipoint bus transmission lines. The transceiver meets EIA Standard RS-485 as well as RS-422A. The DS96176 combines a TRI-STATE® differential line driver and a differential input line receiver, both of which operate from a single 5.0V power supply. The driver and receiver have an active Enable that can be externally connected to function as a direction control.