Datasheet4U Logo Datasheet4U.com

DS3695 - Multipoint RS485/RS422 Transceivers/Repeaters

Description

The DS3695, DS3696, and DS3697 are high speed differential TRI-STATE ® bus/line transceivers/repeaters designed to meet the requirements of EIA standard RS485 with extended common mode range (+12V to

7V), for multipoint data transmission.

Features

  • n Meets EIA standard RS485 for multipoint bus transmission and is compatible with RS-422 n 15 ns driver propagation delays with 2 ns skew (typical) n Single +5V supply n.
  • 7V to +12V bus common mode range permits ± 7V ground difference between devices on the bus n Thermal shutdown protection n High impedance to bus with driver in TRI-STATE or with power off, over the entire common mode range allows the unused devices on the bus to be powered down n Combined impedance of a driver output an.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS36950 Quad Differential Bus Transceiver Texas Instruments
DS36954 Quad Differential Bus Transceiver Texas Instruments
DS3695A Multipoint RS485/RS422 Transceivers Texas Instruments
DS3695AT Multipoint RS485/RS422 Transceivers Texas Instruments
DS3690 Three-Stateable Transmission Gate Maxim Integrated Products

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
DS36950 Quad Differential Bus Transceiver
DS36954 Quad Differential Bus Transceiver
DS3695A Multipoint RS485/RS422 Transceivers
DS3695AT Multipoint RS485/RS422 Transceivers
DS3695T Multipoint RS485/RS422 Transceivers/Repeaters

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DS3695/DS3695T/DS3696/DS3697 Multipoint RS485/RS422 Transceivers/Repeaters May 1998 DS3695/DS3695T/DS3696/DS3697 Multipoint RS485/RS422 Transceivers/Repeaters General Description The DS3695, DS3696, and DS3697 are high speed differential TRI-STATE ® bus/line transceivers/repeaters designed to meet the requirements of EIA standard RS485 with extended common mode range (+12V to −7V), for multipoint data transmission. The driver and receiver outputs feature TRI-STATE capability. The driver outputs remain in TRI-STATE over the entire common mode range of +12V to −7V. Bus faults that cause excessive power dissipation within the device trigger a thermal shutdown circuit, which forces the driver outputs into the high impedance state.
Published: |