Datasheet4U Logo Datasheet4U.com

DS14196 - EIA/TIA-232 5 Driver x 3 Receiver

General Description

The DS14196 is a five driver, three receiver device which conforms to the EIA/TIA-232-E and the ITU-T V.28 standards.

The flow-through pinout facilitates simple non-crossover board layout.

Key Features

  • n n n n n n n n Replaces two 1488s and one 1489 Conforms to EIA/TIA-232-E and ITU-T V.28 5 drivers and 3 receivers Flow-through pinout Failsafe receiver outputs high when inputs open 20-pin wide SOIC package LapLink ® compatible.
  • 230.4 kbps data rate Pin compatible with: SN75196, GD75323 www. DataSheet4U. com Connection Diagram SOP Functional Diagram DS012613-1 Order Number DS14196WM See NS Package Number M20B DS012613-2 LapLink ® is a registered trademark of Travelling Software.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS14196 DS14196 EIA/TIA-232 5 Driver x 3 Receiver (Rev. D) ETCTI
DS1410D Parallel Port Button Holder Dallas Semiconductor
DS1410E Parallel Port Adapter Dallas Semiconductor
DS1411 Serial Port iButton Holder Dallas Semiconductor
DS1411DB-9 Serial Port iButton Holder Dallas Semiconducotr

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
DS14185 EIA/TIA-232 3 Driver x 5 Receiver
DS1487 Low Power RS-485 1/4 Unit Load Multipoint Transceiver
DS1488 Quad Line Driver
DS1489 Quad Line Driver
DS1489A Quad Line Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DS14196 EIA/TIA-232 5 Driver x 3 Receiver February 2000 DS14196 EIA/TIA-232 5 Driver x 3 Receiver General Description The DS14196 is a five driver, three receiver device which conforms to the EIA/TIA-232-E and the ITU-T V.28 standards. The flow-through pinout facilitates simple non-crossover board layout. The DS14196 provides a peripheral side one-chip solution for the common 9-pin serial RS-232 interface between data terminals and data communications equipment. The DS14196 offers optimum performance when used with the DS14185 3 x 5 Driver/Receiver, a host side one-chip solution for the common 9-pin serial RS-232 interface between data terminals and data communications equipment. Features n n n n n n n n Replaces two 1488s and one 1489 Conforms to EIA/TIA-232-E and ITU-T V.