Datasheet4U Logo Datasheet4U.com

DAC121S101Q - RRO Digital-to-Analog Converter

Description

The DAC121S101 is a full-featured, general purpose 12-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7V to 5.5V supply and consumes just 177 µA of current at 3.6 Volts.

Features

  • DAC121S101Q is AEC-Q100 Grade 1 qualified and is.
  • manufactured on an Automotive Grade Flow. Guaranteed Monotonicity Low Power Operation Rail-to-Rail Voltage Output Power-on Reset to Zero Volts Output Wide Temperature Range of.
  • 40°C to +125°C Wide Power Supply Range of +2.7V to +5.5V Small Packages Power Down Feature Key Specifications.
  • Resolution 12 bits DNL +0.25, -0.15 LSB (typ) Output Settli.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DAC121S101QML-SP Radiation Hardened 12-Bit Micro Power Digital-to-Analog Converter Texas Instruments
DAC121S101 RRO Digital-to-Analog Converter Texas Instruments
DAC121S101-Q1 RRO Digital-to-Analog Converter Texas Instruments
DAC121C081 12-Bit Micro Power Digital-to-Analog Converter Texas Instruments
DAC121C085 12-Bit Micro Power Digital-to-Analog Converter Texas Instruments

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
DAC121S101QML 10 - 12-Bit Micro Power Digital-to-Analog Converter
DAC121S101 12-Bit Micro Power Digital-to-Analog Converter
DAC1210 12-Bit/ uP Compatible/ Double-Buffered D to A Converters
DAC1218 12-Bit Binary Multiplying D/A Converter
DAC1219 12-Bit Binary Multiplying D/A Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DAC121S101/DAC121S101Q 12-Bit Micro Power, RRO Digital-to-Analog Converter February 19, 2010 DAC121S101/DAC121S101Q www.DataSheet4U.com 12-Bit Micro Power, RRO Digital-to-Analog Converter General Description The DAC121S101 is a full-featured, general purpose 12-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7V to 5.5V supply and consumes just 177 µA of current at 3.6 Volts. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 30 MHz over the specified supply voltage range and is compatible with standard SPI™, QSPI, MICROWIRE and DSP interfaces. Competitive devices are limited to 20 MHz clock rates at supply voltages in the 2.7V to 3.6V range.
Published: |