Datasheet4U Logo Datasheet4U.com

DAC0802 - 8-Bit Digital-to-Analog Converters

Download the DAC0802 datasheet PDF. This datasheet also covers the DAC variant, as both devices belong to the same 8-bit digital-to-analog converters family and are provided as variant models within a single manufacturer datasheet.

General Description

The DAC0800 series are monolithic 8-bit high-speed current-output digital-to-analog converters (DAC) featuring typical settling times of 100 ns.

When used as a multiplying DAC, monotonic performance over a 40 to 1 reference current range is possible.

Key Features

  • high compliance complementary current outputs to allow differential output voltages of 20 Vp-p with simple resistor loads as shown in Figure 1. The reference-to-full-scale current matching of better than ± 1 LSB eliminates the need for full-scale trims in most.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (DAC-0800.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
DAC0802 8-Bit Digital-to-Analog Converters Texas Instruments
DAC0800 8-Bit Digital-to-Analog Converters Texas Instruments
DAC08 8-Bit high-speed multiplying D/A converter NXP
DAC08 Multiplying D/A Converter Analog Devices
DAC081C081 8-Bit Micro Power Digital-to-Analog Converter Texas Instruments

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
DAC0800 8-Bit Digital-to-Analog Converters
DAC0801 8-BIT DIGITAL-TO-ANALOG CONVERTERS
DAC0806 8-Bit D/A Converters
DAC0807 8-Bit D/A Converters
DAC0808 8-Bit D/A Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DAC0800/DAC0802 8-Bit Digital-to-Analog Converters June 1999 DAC0800/DAC0802 8-Bit Digital-to-Analog Converters General Description The DAC0800 series are monolithic 8-bit high-speed current-output digital-to-analog converters (DAC) featuring typical settling times of 100 ns. When used as a multiplying DAC, monotonic performance over a 40 to 1 reference current range is possible. The DAC0800 series also features high compliance complementary current outputs to allow differential output voltages of 20 Vp-p with simple resistor loads as shown in Figure 1. The reference-to-full-scale current matching of better than ± 1 LSB eliminates the need for full-scale trims in most applications while the nonlinearities of better than ± 0.1% over temperature minimizes system error accumulations.