Datasheet4U Logo Datasheet4U.com

ADC128S102QML - 12-Bit A/D Converter

Description

The ADC128S102 is a low-power, eight-channel CMOS 12bit analog-to-digital converter specified for conversion throughput rates of 50 kSPS to 1 MSPS.

The converter is based on a successive-approximation register architecture with an internal track-and-hold circuit.

Features

  • Total Ionizing Dose 100 krad(Si) Single Event Latch-up 120 MeV-cm2/mg Eight input channels Variable power management Independent analog and digital supplies SPI/QSPI/.

📥 Download Datasheet

Datasheet preview – ADC128S102QML

📁 Similar Datasheet

  • ADC128S102QML-SP - Radiation Hardened 8-Channel A/D Converter (Texas Instruments)
  • ADC128S102 - 8-Channel 12-Bit A/D Converter (Texas Instruments)
  • ADC128S022 - 12-Bit A/D Converter (Texas Instruments)
  • ADC128S052 - 12-Bit A/D Converter (Texas Instruments)
  • ADC128S052-Q1 - 12-Bit A/D Converter (Texas Instruments)
  • ADC128 - Single & Dual Output DC/DC Converters (MPS Industries)
  • ADC1283 - 12-bit SAR ADC (STMicroelectronics)
  • ADC128D818 - 12-Bit 8-Channel ADC System Monitor (Texas Instruments)
  • ADC120 - 12-bit A/D converter (STMicroelectronics)
  • ADC12010 - A/D Converter (Texas Instruments)
Other Datasheets by National Semiconductor
  • ADC128S102 - 12-Bit A/D Converter
  • ADC128S022 - 12-Bit A/D Converter
  • ADC128S052 - 12-Bit A/D Converter
  • ADC1280 - 12-Bit Successive Approximation A/D Converter
  • ADC128D818 - ADC System Monitor
  • ADC12010 - 12-Bit/ 10 MSPS/ 160 mW A/D Converter
  • ADC12020 - 12-Bit/ 20 MSPS/ 185 mW A/D Converter
  • ADC12030 - Self-Calibrating 12-Bit Plus Sign Serial I/O A/D Converters

Full PDF Text Transcription

Click to expand full text
ADC128S102QML 8-Channel, 50 kSPS to 1 MSPS, 12-Bit A/D Converter May 17, 2010 ADC128S102QML 8-Channel, 50 kSPS to 1 MSPS, 12-Bit A/D Converter General Description The ADC128S102 is a low-power, eight-channel CMOS 12bit analog-to-digital converter specified for conversion throughput rates of 50 kSPS to 1 MSPS. The converter is based on a successive-approximation register architecture with an internal track-and-hold circuit. It can be configured to accept up to eight input signals at inputs IN0 through IN7. The output serial data is straight binary and is compatible with several standards, such as SPI™, QSPI™, MICROWIRE™, and many common DSP serial interfaces. The ADC128S102 may be operated with independent analog and digital supplies. The analog supply (VA) can range from +2.7V to +5.
Published: |