Click to expand full text
TJA1083
FlexRay node transceiver
Rev. 1 — 10 October 2012 Product data sheet
1. General description
The TJA1083 FlexRay node transceiver is compliant with the FlexRay Electrical Physical Layer specification V3.0.1 (see Ref. 1). In order to meet JASPAR the equirements, it implements the ‘Increased voltage amplitude transmitter’ functional class. It is primarily intended for communication systems operating at between 2.5 Mbit/s and 10 Mbit/s, and provides an advanced interface between the protocol controller and the physical bus in a FlexRay network. The TJA1083 offers an optimized solution for Electronic Control Unit (ECU) applications that do not need enhanced power management and are typically switched by the ignition or activated by a dedicated wake-up line.
TJA1083 Datasheet
