Datasheet4U Logo Datasheet4U.com

TFA9882 - 3.4 W I2S input mono class-D audio amplifier

General Description

The TFA9882 is a mono, filter-free class-D audio amplifier in a 9-bump WLCSP (Wafer Level Chip-Size Package) with a 400 μm pitch.

It receives audio and control settings via an I2S digital interface.

Key Features

  • Small outline WLCSP9 package: 1.27 × 1.49 × 0.6 mm Wide supply voltage range (fully operational from 2.5 V to 5.5 V) High efficiency (90 %, 4 Ω/20 μH load) and low power dissipation Quiescent power: ‹ 6.5 mW (VDDD = 1.8 V, VDDP = 3.6 V, 4 Ω/20 μH load, fs = 32 kHz) ‹ 7.65 mW (VDDD = 1.8 V, VDDP = 3.6 V, 4 Ω/20 μH load, fs = 48 kHz) Output power: ‹ 1.4 W into 4 Ω at 3.6 V supply (THD = 1 %) ‹ 2.7 W into 4 Ω at 5.0 V supply (THD = 1 %) ‹ 3.4 W into 4 Ω at 5.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TFA9882 3.4 W I2S input mono class-D audio amplifier Rev. 2 — 20 April 2011 Product data sheet 1. General description The TFA9882 is a mono, filter-free class-D audio amplifier in a 9-bump WLCSP (Wafer Level Chip-Size Package) with a 400 μm pitch. It receives audio and control settings via an I2S digital interface. The Power-down to Operating mode transition is triggered when a clock signal is detected on the bit clock input (BCK). Two devices can be combined to build a stereo application. In stereo applications, the left or right I2S audio stream is selected by connecting the word select signal to, respectively, pin WSL or pin WSR. Mono mixing can be achieved by connecting the word select signal to both WSL and WSR. Switching off the word select signal selects Mute mode.