Datasheet4U Logo Datasheet4U.com

TFA9881 - 3.4 W PDM input class-D audio amplifier

General Description

The TFA9881 is a mono, filter-free class-D audio amplifier in a 9-bump WLCSP (Wafer Level Chip-Size Package) with a 400 m pitch.

The digital input interface is an over-sampled Pulse Density Modulated (PDM) bit stream.

The TFA9881 receives audio and control settings via this interface.

Key Features

  • Small outline WLCSP9 package: 1.3  1.3  0.6 mm.
  • Wide supply voltage range (fully operational from 2.5 V to 5.5 V).
  • High efficiency (90 %, 4 /20 H load) and low power dissipation.
  • Quiescent power:.
  • 6.5 mW (VDDD = 1.8 V, VDDP = 3.6 V, 4 /20 H load, fclk = 2.048 MHz).
  • 7.8 mW (VDDD = 1.8 V, VDDP = 3.6 V, 4 /20 H load, fclk = 6.144 MHz).
  • Output power:.
  • 1.4 W into 4  at 3.6 V supply (THD = 1 %).
  • 2.7 W into 4  at 5.0 V supply (THD = 1 %).
  • 3.4.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TFA9881 3.4 W PDM input class-D audio amplifier Rev. 3 — 23 April 2013 Product data sheet 1. General description The TFA9881 is a mono, filter-free class-D audio amplifier in a 9-bump WLCSP (Wafer Level Chip-Size Package) with a 400 m pitch. The digital input interface is an over-sampled Pulse Density Modulated (PDM) bit stream. The TFA9881 receives audio and control settings via this interface. Dedicated silence patterns are used to configure the control settings of the device, such as mute, gain, Pulse Width Modulated (PWM) output slope, clip control and bandwidth extension (this control mechanism is not required if the default settings are used). The Power-down to Operating mode transition is triggered when a clock signal is detected.