SSL21081T Datasheet | NXP Semiconductors

description The SSL2108X is a range of high-voltage Integrated Circuits (ICs), intended to drive LED lamps in general lighting applications. The main benefits of the product family are: - - - - Small Printed-Circuit Board (PCB) footprint, and pact solution High efficiency (up to 95 %) Ease of integration Low electronic Bill Of Material (BOM) The product family is made of ICs with a range of internal HV switches for easy power scaling. The ICs work as boundary conduction mode converters, typically in buck configuration. The IC range has been designed to start up directly from the HV supply by an internal high-voltage current source. Thereafter, the d V/dt supply is used with capacitive coupling from the drain, or any other auxiliary supply. This functionality provides full flexibility in the application design. The IC consumes 1.3 m A of supply current with an internal clamp limiting the supply voltage. .Data Sheet.net/ The ICs provide accurate output current control with LED current accuracy within 5%. The ICs can be operated using Pulse-Width Modulation (PWM) dimming and has many protection features including easy LED temperature feedback. 2. Features and benefits - LED driver IC family driving strings of LEDs from a rectified mains supply - High-efficiency switch mode buck driver product family: - Drivers with integrated 300 V (SSL21081 and SSL21082) or 600 V (SSL21083 and SSL21084) power switches - Controller with power-efficient boundary conduction mode of operation with: - No reverse recovery losses in freewheel diode - Zero Current Switching (ZCS) for turn-on of switch - Zero voltage or valley switching for turn-on of switch - Minimal required inductance value and size - Direct PWM dimming possible - Fast transient response through cycle-by-cycle current control: - Negligible AC mains ripple at LED current and minimal total capacitor value Datasheet pdf - http://..co.kr/ NXP Semiconductors SSL21081T/2T/3T/4T Green Chip drivers for LED lighting - - - -...