PCF8811 Datasheet | NXP Semiconductors

80 x 128 pixels matrix LCD driver Rev. 6 - 10 February 2015 Product data sheet 1. General description The PCF8811 is a low-power CMOS1 LCD controller and driver. It is designed to drive a graphic display of 80 rows and 128 columns or of 79 rows, 128 columns, and an icon row of 128 symbols. All necessary functions for the display are provided in a single chip, including on-chip generation of the LCD supply and bias voltages. Therefore only a minimum of external ponents are required and power consumption is low. The PCF8811 can interface microcontrollers via a parallel bus, serial bus, or I2C-bus interface. For a selection of NXP LCD graphic drivers, see Table 44 on page 85. 2. Features and benefits - Single-chip LCD controller and driver - 80 row and 128 column outputs - Display data RAM 80  128 bit - 128 icons (in extended mand set row 79 can be configured for displaying icons) - Low power consumption; suitable for battery operated systems - Interfaces: - 8-bit parallel - 3- or 4-line Serial Peripheral Interface (SPI) - High-speed I2C-bus - Configurable voltage multiplier generating LCD supply voltage VLCD; an external VLCD is also possible - Linear temperature pensation of VLCD: - 8 programmable temperature coefficients (extended mand set) - one fixed temperature coefficient which can be set as default by OTP programming (basic mand set) - Generation of intermediate LCD bias voltage - Oscillator requires no external ponents - OTP calibration for VLCD and accurate frame frequency - External reset input pin - External clock input possible - Multiplex rate 1:16 to 1:80 selectable - in steps of 8 when icon row is not used - in steps of 16 when the icon row is...