Datasheet4U Logo Datasheet4U.com

PCA9561 - Quad 6-bit multiplexed I2C EEPROM DIP switch

General Description

The PCA9561 is a 20-pin CMOS device consisting of four 6-bit non-volatile EEPROM registers, six hardware pin inputs and a 6-bit multiplexed output.

Key Features

  • Selection of non-volatile register_n as source to MUX_OUT pins via I2C-bus.
  • I2C-bus can override MUX_SELECT pin in selecting output source.
  • 6-bit 5-to-1 multiplexer DIP switch.
  • Four internal non-volatile registers.
  • Internal non-volatile registers programmable and readable via I2C-bus.
  • Six open-drain multiplexed outputs.
  • 400 kHz maximum clock frequency.
  • Operating supply voltage 3.0 V to 3.6 V.
  • 5 V and 2.5 V tolerant inputs/outputs.
  • Useful for Spe.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PCA9561 Quad 6-bit multiplexed I2C-bus EEPROM DIP switch Rev. 4 — 6 November 2012 Product data sheet 1. General description The PCA9561 is a 20-pin CMOS device consisting of four 6-bit non-volatile EEPROM registers, six hardware pin inputs and a 6-bit multiplexed output. It is used for DIP switch-free or jumper-less system configuration and supports Mobile and Desktop VID Configuration, where five preset values (four sets of internal non-volatile registers and one set of external hardware pins) set processor voltage for operation in various performance or battery conservation sleep modes.