Datasheet4U Logo Datasheet4U.com

GTL2014 - 4-bit LVTTL to GTL transceiver

General Description

The GTL2014 is a 4-bit translating transceiver designed for 3.3 V LVTTL system interface with a GTL

/GTL/GTL+ bus.

The direction pin allows the part to function as either a GTL to LVTTL sampling receiver or as a LVTTL to GTL interface.

Key Features

  • s Operates as a 4-bit GTL.
  • /GTL/GTL+ sampling receiver or as a LVTTL to GTL.
  • /GTL/GTL+ driver s 3.0 V to 3.6 V operation with 5 V tolerant LVTTL input s GTL input and output 3.6 V tolerant s Vref adjustable from 0.5 V to VCC/2 s Partial power-down permitted s ESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM per JESD22-A115, and 1000 V CDM per JESD22-CC101 s Latch-up protection exceeds 500 mA per JESD78 s Package offered: TSSOP14 3. Quick reference data Table 1: Quick re.

📥 Download Datasheet

Datasheet Details

Part number GTL2014
Manufacturer NXP Semiconductors
File Size 108.46 KB
Description 4-bit LVTTL to GTL transceiver
Datasheet download datasheet GTL2014 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
GTL2010 10-bit GTL Processor Voltage Clamp NXP
GTL2000 22-bit bi-directional low voltage translator NXP
GTL2002 2-bit bi-directional low voltage translator NXP
GTL2004 Quad GTL/GTL to LVTTL/TTL bidirectional latched translator NXP
GTL2005 Quad GTL/GTL+ to LVTTL/TTL bidirectional non-latched translator NXP

Other Datasheets by NXP Semiconductors

Part Number Description
GTL2003 8-bit bidirectional low voltage translator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
GTL2014 4-bit LVTTL to GTL transceiver Rev. 01 — 19 May 2005 www.DataSheet4U.com Product data sheet 1. General description The GTL2014 is a 4-bit translating transceiver designed for 3.3 V LVTTL system interface with a GTL−/GTL/GTL+ bus. The direction pin allows the part to function as either a GTL to LVTTL sampling receiver or as a LVTTL to GTL interface. The GTL2014 LVTTL inputs (only) are tolerant up to 5.5 V allowing direct access to TTL or 5 V CMOS inputs. The LVTTL outputs are not 5.5 V tolerant. The GTL2014 GTL inputs and outputs operate up to 3.6 V, allowing the device to be used in higher voltage open-drain output applications. 2. Features s Operates as a 4-bit GTL−/GTL/GTL+ sampling receiver or as a LVTTL to GTL−/GTL/GTL+ driver s 3.0 V to 3.