Datasheet4U Logo Datasheet4U.com

DAC1405D750 - Dual 14-bit DAC

Description

The DAC1405D750 is a high-speed 14-bit dual channel Digital-to-Analog Converter (DAC) with selectable 4× or 8× interpolating filters optimized for multi-carrier wireless transmitters.

Features

  • Dual 14-bit resolution.
  • IMD3: 76 dBc; fs = 737.28 Msps; fo = 140 MHz 750 Msps maximum update rate.
  • ACPR: 71 dBc; 2-carrier WCDMA; fs = 737.28 Msps; fo = 153.6 MHz Selectable 4× or 8× interpolation filters.
  • Typical 1.2 W power dissipation at 4× interpolation, PLL off and 740 Msps Input data rate up to 185 Msps.
  • Power-down and Sleep modes Very low noise.

📥 Download Datasheet

Datasheet Details

Part number DAC1405D750
Manufacturer NXP Semiconductors
File Size 371.73 KB
Description Dual 14-bit DAC
Datasheet download datasheet DAC1405D750 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DAC1405D750 Dual 14-bit DAC IDT
DAC1405D650 Dual 14-bit DAC IDT
DAC1401D125 Dual 14-bit DAC IDT
DAC1403D160 Dual 14-bit DAC IDT
DAC1408 8 Bit Multiplying D/A Converter Fairchild

Other Datasheets by NXP Semiconductors

Part Number Description
DAC1405D650 Dual 14-bit DAC
DAC1403D160 Dual 14 bits DAC
DAC1003D160 Dual 10 bits DAC
DAC1008D650 Dual 10-bit DAC
DAC1008D750 Dual 10-bit DAC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DAC1405D750 Rev. 01 — 10 March 2010 www.DataSheet4U.com Dual 14-bit DAC, up to 750 Msps; 4× and 8× interpolating Preliminary data sheet 1. General description The DAC1405D750 is a high-speed 14-bit dual channel Digital-to-Analog Converter (DAC) with selectable 4× or 8× interpolating filters optimized for multi-carrier wireless transmitters. Thanks to its digital on-chip modulation, the DAC1405D750 allows the complex I and Q inputs to be converted from BaseBand (BB) to IF. The mixing frequency is adjusted via a Serial Peripheral Interface (SPI) with a 32-bit Numerically Controlled Oscillator (NCO) and the phase is controlled by a 16-bit register. Two modes of operation are available: separate data ports or a single interleaved high-speed data port.